Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
actuator pin broke off
7 of 12 peoplefound this instruction helpful.
Dr. B. W. from Coatesville, PA
Really Easy
Less than 15 mins
Pliers, Screw drivers
pulled old actuator base off, followed instructions on how to install new actuator - followed them - piece of cake.
Thanks
Was this helpful?
Thank you for voting!
Leak where hose hooks to adapter
4 of 5 peoplefound this instruction helpful.
DANIEL from FOND DU LAC, WI
Very Easy
Less than 15 mins
Took old one off , installed new one!!
Was this helpful?
Thank you for voting!
Rollers Disintegrated
5 of 8 peoplefound this instruction helpful.
C. John from Brisbane, CA
Easy
15 - 30 mins
Screw drivers
Hello -
Upper rack fell down unexpectedly one night while loading the dishwasher -- evidentally the rollers had been deterioraring for a long time.
Orderd the new ones from you folks and installed them.
The problem I had was not with the replacement parts received, but making sure they were the correct on
... Read morees 'on line', ( called as well ), and then not having a thin enough wrench to hold the nylon nut while unscrewing the bushings which required a large width screwdriver.
I have already sent you an e-mail saying how happy I am with the new pieces.
Just another example of how the right tools can make everything go a lot smoother, but we everyday consumers often don't have them.....
Read less
Was this helpful?
Thank you for voting!
The bumpers on the bottom rack of the dishwasher broke and the rack would slide out everytime I opened the door.
4 of 6 peoplefound this instruction helpful.
Linda from Queen Creek, AZ, AZ
Really Easy
Less than 15 mins
I took the first bumper, I had bought two, and tried to snap in on to the rack. It was too rigid and broke.
My son heated the second one in hot water and it snapped right on.
At least I know the secret to installation, but now I need another bumper.
Was this helpful?
Thank you for voting!
I had a dishwasher I could not use
6 of 12 peoplefound this instruction helpful.
Joseph from Davenport, FL
Really Easy
Less than 15 mins
Wrench (Adjustable)
I have a new faucet so I remove the screen then I used an extender ring put on your adapter an got the washer to run.
Was this helpful?
Thank you for voting!
Plastic roller axles were broken.
3 of 4 peoplefound this instruction helpful.
David from Woodbridge, VA
Really Easy
Less than 15 mins
Snapped in new ones (8) by hand. I was amazed how fast I was able to find this part online and the ordering was easy and in a few days the parts arrived. No hassle trying to explain to anyone what part I needed. There were pictures of all parts available. Ordering online, especially if you know what you a
... Read morere looking for, is really the way to go.
Portable Dishwasher was leaking around connection to faucet.
3 of 4 peoplefound this instruction helpful.
Mike from CASTLETON, NY
Very Easy
Less than 15 mins
Purchased and installed new faucet attachment. It arrived quickly and very easy to attach. Thank you !
Was this helpful?
Thank you for voting!
Bottom rack would not roll easily and often came off track
3 of 4 peoplefound this instruction helpful.
Thomas from Great Falls, VA
Really Easy
15 - 30 mins
Pliers
I just pulled out the rack and removed the eight existing roller wheels and roller axles. I was able to remove most of the roller axles with my fingers but needed pliers to remove a couple of them. I then snapped the new roller axles onto the rack and then the roller wheels onto the new roller axles and put the entire rack back in the d
... Read moreishwasher. The lower rack now rolls smoothly and consistently no matter how many dishes we have piled into it. Also, it has not come off the tracks since replacing the roller axles and roller wheels.
I unscrewed the screws and slid the panels in. Very easy. I wanted all the appliances to have a stainless steel look.
Was this helpful?
Thank you for voting!
Upper Rack would not wash
2 of 2 peoplefound this instruction helpful.
Glenn from Nashua, NH
Really Easy
Less than 15 mins
I pulled back the tray and inserted the funnel like part into the rubber tube. That was it. I wonder where the original part disappeared to.
Was this helpful?
Thank you for voting!
wheels on dishwasher rack falling off and apart, so i couldn't roll the bottom rack in and out
2 of 2 peoplefound this instruction helpful.
connie from Longboat Key, AL
Really Easy
Less than 15 mins
i pulled the rack out, took off the old parts then added the new ones. it was quick and simple. i needed no tools and my package of parts arrived quicker than i thought. thanks!
Was this helpful?
Thank you for voting!
roller axles had broken releasing wheels
2 of 2 peoplefound this instruction helpful.
Linda from Moundsville, WV
Really Easy
Less than 15 mins
I ordered 8 new axles and used old wheels. I broke off the remaining axle parts left on the wire lower basket with just my hands, and then popped on the new axles. This was done without tools; just needed significant pressure to pop the axles onto the coated wire. The wheels popped onto the axles with a little pressure. Make sure you
... Read morehave the right side of the wheel out. I simply looked at the remaining working wheels before install began to make sure which side goes out. Very easy install.
Read less
Was this helpful?
Thank you for voting!
3 roller axles were broken on bottom dishwasher rack.
2 of 2 peoplefound this instruction helpful.
Sherry from Hollywood, FL
Easy
15 - 30 mins
Pliers
I pulled off the broken parts and snapped on the new axles, then replaced the wheels. Very simple.
Was this helpful?
Thank you for voting!
dishwasher rack rusted
2 of 2 peoplefound this instruction helpful.
ELLEN from TUSCALOOSA, AL
Really Easy
15 - 30 mins
Screw drivers
It was easy to remove rack from dishwasher. I screwed on rollers and it was like new!
Was this helpful?
Thank you for voting!
plastic rollers were disintegrating and top rack would fall off
3 of 6 peoplefound this instruction helpful.
Cynthia from Kirtland, OH
Easy
15 - 30 mins
Pliers, Screw drivers
We have a remote cottage in Canada with a dishwasher over 30 years old. Since you have to get there by boat we didn't want to have to get a whole new dishwasher installed. The plastic rollers from the top shelf had fallen apart and the top rack would fall off all the time. My daughter found your company online and ordered the exact par
... Read morets for me! I couldn't believe it. For about $20.00 my dishwasher was fixed by my husband in less than a half hour. It was easy to order the parts from you, they were shipped immediately and worked perfectly. Thank you so much for your help with our dishwasher parts. I was laughed out of Lowe's, Home Depot, Sears and H.H. Gregg when I took my old parts there looking for help with replacement parts. I would recommend your company to everyone.
My Orders
