4860 - Instructions

follow the EASY to read and understand instructions.replaced all 4 controls in about 35 min.

I removed the two screws holding the control panel in place with a Phillips screwdriver, pulled the assembly of switches up, and found the number on the old switches. Amazingly on PartsSelect's website I found a picture of the exact switch with the exact same part number stamped on it. I ordered three new switches, and they arrived two ... Read more or three days later. I removed the wires from the old switch with a pair of needle-nose pliers, reconnected them to the new switch in the exact same places, and had all three of them installed and working perfectly in about 45 minutes or an hour.

Unfortunately it was the wrong part I replaced the infinite switch and had the same problem so I am still trouble shooting but I plan to continue to use parts select they are excellent to work with and very quick to deliver parts

De-energized appliance power at it's circuit breaker. Removed control panel access cover. Removed control panel. Removed old thermostat and installed new thermostat. Reset control panel and access cover. Reset appliance circuit breaker. Confirmed thermostat operation.

I ordered part one day, recieved part the next day. I installed it the next day. It worked perfect. THANK YOU!

I used process of elimination to figure out the issue with my 28 year old Jenn-Air cooktop. Issue: One day while cooking there was a loud pop & from then the front burner no longer had any temp control & only heated to full blast plus. Steps to fix: 1) Replaced the surface burner elements PS2195246 - this didn't fix the issue but they l ... Read more ook nicer now. This was a simple plug in - no tools needed. 2) Replaced the grill side with a 2 burner plug in part PS1941381. Also simple plug in with no tools required. This didn't fix the isssue & I found that the front burner on the new unit also had no temp control. 3) Replaced the Surface Burner Receptacles for the 2 original burners PS1570190. This required turning off the breaker, removing the cooktop by unscrewing all the little screws & then cutting the old connections with wire cutters and wiring the new parts in with wire nuts & electrical tape. It took maybe half an hour but did not fix the issue. 4) Replaced the Surface Unit Infinite Switch Kit PS2076107 for the front 2 burners. Removed the screws just for the center control panel (after turning off the breaker) then took a picture of the wire configuration & removed the old parts by pulling (hard) at the connections until they unplugged. Put the new part in with the same wire placement. This finally fixed the issue & we now have 4 working burners for the first time in the >1 year that we have lived in this house.

After a long time being without a working stovetop-an electrician friend said we needed to change a switch-it was ordered and came very quickly and installed-then it was determined that we needed a switch for the other side of the stovetop-I ordered it and got it the next day! It was a joy cooking thanksgiving dinner on a stove that worke ... Read more d-and I have a new friend that is interested in seeing me on a more regular basis. I know if I needed any kind of parts, I would check with partselect first ;)

Very easy to replace the filter, nothing to it, take out the old filter and put in the new filter.

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

Lifted the old one out and put the new one in. Very easy

Lifter grill and replaced filter. It fit perfectly.

Replacing the switch was quick and easy. It actually took only about two minutes.

Placed new burner knobs onto cooktop. easy

The part was a perfect match and the instructions clear. Easiest $75.00 I ever saved.

Thanks for carrying this part for my old stove. And thanks for the great service.