EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

4665 - Instructions

All Instructions for the 4665
46 - 60 of 95

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No instructions included
1 person found this instruction helpful.
  • Beverly from Provo, UT
  • Easy
  • Less than 15 mins
Visual assessment and put in by hand.
Was this helpful?
Thank you for voting!
Kids broke the handle somehow on the garage freezer
2 of 4 people found this instruction helpful.
  • Geneva from Murrieta, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
By simply popping off the handle cover the two screws were revealed which attach the handle to the door. New handle fit exactly like the old one. Easy peezzy lemon squeezy.
Was this helpful?
Thank you for voting!
Just lost key
2 of 4 people found this instruction helpful.
  • Toni from Little Rock, AR
  • Really Easy
  • Less than 15 mins
No repair. The key fit!
Was this helpful?
Thank you for voting!
The end cap of the bottom shelf of my freezer was broken
1 person found this instruction helpful.
  • Kathleen from SELDEN, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Finally after a few years of putting the shelf back on and balancing food on it I looked up the part.
The clips came in a few days.
I used a screwdriver to pop off the old piece. I lined up the clip and pushed it in.!
I am sooo glad I purchased this.
Was this helpful?
Thank you for voting!
Broken handle
1 of 2 people found this instruction helpful.
  • Bill from Elmira, NY
  • Easy
  • Less than 15 mins
  • Screw drivers
I was surprised that the screws and trim piece were not included so make sure you have them from the old handle or order new. First removed the broken ends still on the freezer. I removed the small metal brackets from the old handle and put them on the new one, screwed the handle to the freezer and put the trim piece on. Real easy.
Was this helpful?
Thank you for voting!
broken pieces
2 of 5 people found this instruction helpful.
  • D from Fairport, NY
  • Really Easy
  • Less than 15 mins
replaced them
Was this helpful?
Thank you for voting!
Lost Key
1 of 2 people found this instruction helpful.
  • Kelli from Goosecreek, SC
  • Really Easy
  • Less than 15 mins
It's easy to know how to use a key. I didn't have a difficult part, I didn't have the model # because I had lost my key and the model # is inside. I was able to find the energy saving paper that came with it but it had four model #'s. I called a couple places and no could me. I pulled up Part Select on line and just thought I would giv e them a try. I got a very nice person (Jeremy) He went thru every model that I had and three out of the four matched so he sent me a key and if it didn't work I could get my money back. I give him a A+ four taking that extra step, unlike the other places. Very satisfied!
Was this helpful?
Thank you for voting!
Refrigerator keeps frosting up and not cooling
1 of 2 people found this instruction helpful.
  • Marvin from Pima, AZ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Refrigerator started frosting up and running all the time.I'd defrost it and it would frost up again in about a week.The timer seems to be work so I just guest it mite be the Defrost Thermostat.I removed the duck in the center and back panel in the freezer compartment defrosted it and switched Thermostats and replaced panel and duck, goi ng to lower compartment of the refrigerator.So far it seems to be working a little more time while tell.
Was this helpful?
Thank you for voting!
Lost original key
1 of 2 people found this instruction helpful.
  • katrina from EAST ORANGE, NJ
  • Very Easy
  • Less than 15 mins
Brought replacement key works just like original I thought it would be metal from reviews but it was plastic and still works perfectly
Was this helpful?
Thank you for voting!
shut freezer-vacuum pump made hard to reopen-wife broke handle in tugging.
1 of 2 people found this instruction helpful.
  • mike from longview, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
first removed two screws that held handle. Then replaced. Ordered a motor 3 years ago from land office with verbal over counter instructions and that was easier but to get part this time was very simple ! With the model number and name brand input on site I had part in 3 days instead of waiting for a chance to visit land store and HOPE th ey had the part. Y'all might consider a zoom feature for us older folks.
Was this helpful?
Thank you for voting!
Could Not Lock
2 of 6 people found this instruction helpful.
  • brenda from snellville, GA
  • Really Easy
  • Less than 15 mins
Oh yea thanx to partselect it went great didnt get fisrtkey but when got the second key it worked great thanx partselect
Was this helpful?
Thank you for voting!
broken shelf end
0 of 1 people found this instruction helpful.
  • Roger from Enfield, NH
  • Really Easy
  • Less than 15 mins
snapped in the new shelf end and we were back in business. Thanks for the great & fast service RJL
Was this helpful?
Thank you for voting!
The handle broke off the door
0 of 1 people found this instruction helpful.
  • Martha M from Fort Worth, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We removed the trim and the screws and kept them in a safe place until the handle arrived. It took only about 10 minutes start to finish. Very Easy!
Was this helpful?
Thank you for voting!
The refrgerator would not run
3 of 10 people found this instruction helpful.
  • Alan from Puyallup, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
When I pulled the compressor relay out to check it, it disintegrated in my hands. Replced relay for $4.14.
Was this helpful?
Thank you for voting!
Evaporator freezing up. Noticed Ice cream not frozen solid
0 of 1 people found this instruction helpful.
  • Paul from Buffalo, MN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Notice ice build up on the panel in front of the evaporator coil. Unplugged freezer and removed evaporator panel. Plugged unit back in and checked fan, coil "snap switch" and heater element, all seemed to check out good. Found defrost timer stuck in the freeze position, causing frost to accumulate over the evaporator. Manually rotated defrost timer to the 30min defrost cycle and system went into defrost. Ordered defrost timer and installed (part arrived in 3 days). Freezer works great again. Too bad I ended up throwing 400 dollars worth of meat away. the fix was very simple. Will definitely use PartSelect again. Thank you.
Was this helpful?
Thank you for voting!
All Instructions for the 4665
46 - 60 of 95