41741122410 Kenmore Washer - Parts

This is a door striker, it is gray in color and is a part found on your washer. The purpose of the striker is to keep your washer door closed for usage. This piece will attach to your appliance lid and will activate the door switch when your lid is closed. The most common reasons for needing to replace this part are if your lid will not c...Read moreonsistently open or close, and your washer will not consistently start. The only tool you will need to complete this installation is a Phillips screwdriver.

This is a door hinge with bushings and works in conjunction with your washer. The purpose of this part is to attach to the outside of the front door panel to help with the lid opening and closing properly. The hinge will fasten the front panel of the washing cabinet to the lid of the washer. This piece is roughly 9 inches long, almost 3 i...Read morenches high, and roughly 2.5 inches wide. The reason for needing to replace this part is if your lid/door will not open or close properly, which may lead to leaking.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Sold individually.

This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.

Upgrade your home appliance with the Frigidaire Boot Seal Retaining Ring. An original and genuine replacement fastener, this quality piece ensures lasting durability and efficient performance. Specially designed for easy installation, this spring-held bellows clamp secures the door boot in place, enhancing the functionality and longevity ...Read moreof your washing machine. Please make sure that before purchase, your model is compatible with this product to assure accurate fitting. Remember to unplug your washer beforehand and wear work gloves during installment for optimum safety. Choose this genuine Frigidaire part for reliable, worry-free maintenance.

This dispenser drawer handle frame attaches to the detergent drawer of select washing machine models, allowing for smooth opening and closing. Made from durable white plastic with a clear exterior accent, it’s designed to restore functionality when the original part is cracked or the mounting tabs are broken. Measuring to fit precisely, t...Read morehis replacement part is compatible with various models and is sold individually. Be sure to verify your washer’s model number before purchasing to ensure proper fit.

This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and is chrome-colored. The shoulder screw measures to be less than an inch long, and has a flat bottom and top. In general screws are typically...Read more made of metal, and the purpose of them is to be used as a fastener when attaching one piece/part to another. This model is sold individually.

This detergent drawer assembly is designed to hold and dispense cleaning agents during the wash cycle. It features separate compartments for liquid or powder detergent, fabric softener, and bleach, ensuring each is released at the correct time for optimal cleaning performance. Positioned at the front of the washer, the drawer helps mainta...Read morein proper distribution and prevents residue buildup. Replacing this part can resolve issues such as detergent not dispensing, leaks or puddles near the drawer, lingering odors, or difficulty opening and closing the drawer. Installation is straightforward—slide the old drawer out, align the new one, and secure it in place.

This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.

Sold individually.

With the GE Single Serve Hot Water Tank, you'll never be without hot water from your refrigerator dispenser whenever you need it. This crucial component safely stores and warms your water so it's always ready at a moment's notice. So why is this part so important? Well, without it, your refrigerator's hot water dispenser simply wouldn't...Read more function. Also, it's an easy way to give your GE refrigerator a performance boost, bringing it back to its original tip-top shape! Installation is simple, although it's wise to keep a few things in mind: don't forget to unplug your refrigerator and, for added safety, switch off the water supply. Clearing out any perishable foods is also key, as they could spoil without power. And during installation, wearing work gloves is a good idea?it's always better to be safe than sorry! Enhance the convenience of your kitchen experience and restore your GE refrigerator to its peak performance with this handy hot water tank. Trust us, this small investment is a big help in keeping your life running smoothly.