Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heat shield on lower spray arm came loose and blocked spray arm from turning
1 personfound this instruction helpful.
Jack D from CLEBURNE, TX
Very Easy
Less than 15 mins
Followed instructions on how-to video on website on how to remove and replace lower spray arm.
Was this helpful?
Thank you for voting!
plastic snap retainers broken
1 personfound this instruction helpful.
Bill from GOLDEN, CO
Really Easy
Less than 15 mins
Screw drivers
Although the replacement part was different that the original, the replacement is a better design and attached with no difficulty.
Was this helpful?
Thank you for voting!
Holes in old dishwasher basket
1 personfound this instruction helpful.
James from FAIRFIELD, CT
Very Easy
Less than 15 mins
The replacement dishwasher basket easily fit in my dishwasher. Easy to order. Quick delivery. Highly recommended.
Was this helpful?
Thank you for voting!
Rollers worn out, top rack would not slide open or closed without wiggling around.
1 personfound this instruction helpful.
Darrell from DELANO, CA
Very Easy
Less than 15 mins
Screw drivers
Removed rack, removed old roller pieces, installed new, replaced rack , and works as new now!!
Was this helpful?
Thank you for voting!
Our dishwasher lower arm had become clogged
1 personfound this instruction helpful.
M Anne from VIENNA, VA
Very Easy
Less than 15 mins
Pliers
HAHA! The easiest repair we have ever done! Took it out of the box, snapped the old arm loose, put the new arm in and -- the dishwasher works like new! Thank you!
Was this helpful?
Thank you for voting!
Food particles had started stopping up spray arm and get them out.
1 personfound this instruction helpful.
carla from valdosta, GA
Very Easy
Less than 15 mins
Pulled old spray arm off and snapped new one on. Less than 3 minutes and works great. Dishes are cleaner now.
Was this helpful?
Thank you for voting!
missing toekick
3 of 7 peoplefound this instruction helpful.
KENNETH from WAPPINGERS FALLS, NY
Really Easy
Less than 15 mins
Screw drivers
two screws, two minutes, all done
Was this helpful?
Thank you for voting!
Lower spray arm broke
2 of 5 peoplefound this instruction helpful.
Frank from Sissonville, WV
Really Easy
Less than 15 mins
Replaced lower spray arm
Was this helpful?
Thank you for voting!
detergent cup latch broke
1 of 2 peoplefound this instruction helpful.
Steven from Delanco, NJ
Really Easy
Less than 15 mins
Screw drivers
Very easy - remove the screws around the inside of the door. 6 screws and 2 plugs to remove the assembly. Just be careful not the strip the sheetmetal screws when putting it back together. No screwguns...
Was this helpful?
Thank you for voting!
Missing silverware basket
1 of 2 peoplefound this instruction helpful.
Thomas from Lancaster, CA
Really Easy
Less than 15 mins
Popped in the new one and done!!!
Was this helpful?
Thank you for voting!
The top level where the glasses go was not level because the clips that attach to the rollers were broken
1 of 2 peoplefound this instruction helpful.
Yvonne from West Hills, CA
Really Easy
Less than 15 mins
Removed the broken clips - they snap off then snapped on the new clips and attached them to the rollers.
Was this helpful?
Thank you for voting!
Metal seperated from plastic part of piece
3 of 8 peoplefound this instruction helpful.
Stella from Puyallup, WA
Really Easy
Less than 15 mins
Very Easy! Lift old arm out and replaced it with the new one.
Was this helpful?
Thank you for voting!
From the three bottom rack wheels on each side, the middle wheels were missing from each side.
1 of 2 peoplefound this instruction helpful.
M. from Phoenix, AZ
Really Easy
Less than 15 mins
Pliers
I measured the diameter of the working wheels from the existing ones, and located the parts I needed from the website. I order two packages, each containing the wheels and axles for the rack. When delivered, I snapped the wheels onto the delivered axles. Then, I snapped the axels unto the bottom rack, at the correct place. I used a
... Read more large pliers for leverage because the axel was a bit tight to just simply snap on. The middle wheels are located just behind the front wheels, thereby offering support when the botton rack is pulled forward for loading. Likewise, they offer support when the rack is pushed back in place.
Read less
Was this helpful?
Thank you for voting!
install missing upper spray arm destroyed by renters.
Dish Washer not cleaning well, spray arms not turning much all ttree had mineral build-up and even trash in them.
1 of 2 peoplefound this instruction helpful.
Roger from SADDLEBROOKE, AZ
Really Easy
15 - 30 mins
Nutdriver
Ordered and replaced all three spray arms. The upper and middle spray arms were quickly replaced with a net-driver and are now working much better. The lower spray arm required no tool, just turn it CCW and lift it up. After replacement lower spray arm is still not moving at all. Maybe the lower spray arm washer is defective or the pum
... Read morep is just not putting out enough water. Will consider further repairs or replacement of the dish washer, it is 13 years old and used daily.
My Orders
