My Orders
4071620 General Electric Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old parts showing wear
2 of 2 people
found this instruction helpful.
-
Suzanne from CHEYENNE, WY
- Really Easy
- Less than 15 mins
Watched a YouTube video on disassembly, parts replacement, and reassembly.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken middle spray arm
2 of 2 people
found this instruction helpful.
-
Pamela from Bakersfield, CA
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Unscrewed the screw holding it in place and removed it, out the new one in place and screwed it on. Very quick and simple.
Was this helpful?
Thank you for voting!
Leaking from front
3 of 5 people
found this instruction helpful.
-
David from North Charleston, SC
- Really Easy
- Less than 15 mins
I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.
Was this helpful?
Thank you for voting!
One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.
3 of 5 people
found this instruction helpful.
-
Sheila from DEERFIELD, IL
- Very Easy
- 15 - 30 mins
Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.
Was this helpful?
Thank you for voting!
Rinse aid cap leaking
2 of 2 people
found this instruction helpful.
-
David from BURKBURNETT, TX
- Very Easy
- Less than 15 mins
Opened the door on dishwasher and installed the rinse aid cap. Checked for leaks. None found
Was this helpful?
Thank you for voting!
Leaked front right side
2 of 2 people
found this instruction helpful.
-
robert from HAYMARKET, VA
- Really Easy
- 15 - 30 mins
-
Pliers
Followed the instructions that came with the my order
Was this helpful?
Thank you for voting!
NONE
3 of 5 people
found this instruction helpful.
-
Edward from GRAND BLANC, MI
- Very Easy
- Less than 15 mins
-
Pliers
UNPACKED WHEELS AND CLIP. USING NEEDLE NOSE PLIERS SQUEEZED WHEEL TIP TO INSERT IN WHEEL. REMOVED OLD WHEELS AND RETAINER BY HAND. INSTALLED NEW WHEELS INSTALLED AND NEW RETAINERS
Was this helpful?
Thank you for voting!
Lost cap to rinse aid disoenser
2 of 2 people
found this instruction helpful.
-
MarilynNegri from BLAIRSTOWN, NJ
- Very Easy
- Less than 15 mins
Just screwed it on.
Was this helpful?
Thank you for voting!
Jet dry rinse cape destroyed.
2 of 2 people
found this instruction helpful.
-
Jessie from TYLER, TX
- Really Easy
- Less than 15 mins
Got the part the next day.. opened it and just screwed into place!
Easy as could be. Thank you!!
Easy as could be. Thank you!!
Was this helpful?
Thank you for voting!
Lower wheels kept falling off
3 of 5 people
found this instruction helpful.
-
helmut from EAST KINGSTON, NH
- Really Easy
- Less than 15 mins
Installed new lower rack wheel kit
Was this helpful?
Thank you for voting!
dishrack was worn and causing chips on dishes
2 of 3 people
found this instruction helpful.
-
Kathleen from LOUISVILLE, KY
- Really Easy
- Less than 15 mins
just slid the new rack into place
Was this helpful?
Thank you for voting!
The detergent dispenser latch was broken
2 of 3 people
found this instruction helpful.
-
KEVIN from MACKINAW, IL
- Really Easy
- 15 - 30 mins
-
Screw drivers
The repair was easy. Removed all the screws from the inside door panel, approx. 11. Watch out for that last screw as there isn't anything else holding the outside panel, inside panel and control panel together other than those screws. I then unplugged the old dispenser backed out another 6 screws and replaced the old dispenser with the
... Read more
new one. Put it all back together within about a half hour.
Read less
Was this helpful?
Thank you for voting!
We had a rip in our tub gasket.
3 of 6 people
found this instruction helpful.
-
Estelle from Queen Creek, AZ
- Really Easy
- Less than 15 mins
I removed the old seal, cleaned behind it, and then put the new seal in. We saw a video on You Tube on how to do it. Partselect also sent instructions on a e mail with the order receipt. We enjoyed working with you guys. Your customer service representative was very nice and accurate in sending out the part. All went as she said it w
... Read more
ould. Thanks!!
Read less
Was this helpful?
Thank you for voting!
Detergent cap would not stay closed
2 of 3 people
found this instruction helpful.
-
Michelle from Carlisle, PA
- Easy
- Less than 15 mins
-
Screw drivers
After removing the screws, the front of the dishwasher easily came off. I put 2 screws back in to hold the control panel in place. I did not want that to dangle while replacing the part. The part came off easily after removing the screws. Everything went together easy.
Was this helpful?
Thank you for voting!
Top rack had the plastic coating coming off
2 of 3 people
found this instruction helpful.
-
Chester from North Las Vegas, NV
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Had to replace the top rack in the dishwasher. Removing the top rack was a tricky. Have to push the tab out not in on the stopper ends of the rack. Unscrew the bolts on the water sprayer. Need to slide the sprayer instead of unclipping it. Real easy to do once it is realized. Should have taken 30 minutes if I knew this in advance
Was this helpful?
Thank you for voting!