Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken off end caps, top would slide off, frustrating.
3 of 4 peoplefound this instruction helpful.
Paul from Blairs, VA
Really Easy
Less than 15 mins
did it by hand, carefully flair out the plastic piece only enough to slide it into the metal rail.
Was this helpful?
Thank you for voting!
Front door on Dishwasher Leaking
4 of 7 peoplefound this instruction helpful.
Rick from Jacksonville, FL
Really Easy
Less than 15 mins
Ordered a new tub gasket and, although the gasket went on backorder for two weeks, the repair itself was extremely easy requiring no tools at all!
Was this helpful?
Thank you for voting!
The soap dispenser would not close.
2 of 2 peoplefound this instruction helpful.
tim from prior lake, MN
Really Easy
Less than 15 mins
Screw drivers
This was simple. I took the door apart with a portable screw driver. Then I detached the wires and unscrewed the old module and replaced it. I then put the door back together, loaded the dishwasher and it cleaned my dishes. Even for this `old dog' it was easy.
Was this helpful?
Thank you for voting!
missing cap
3 of 5 peoplefound this instruction helpful.
Jean from White Plains, NY
Really Easy
Less than 15 mins
I placed the missing cap into the dispenser.
Was this helpful?
Thank you for voting!
End Cap and Wheel axle were worn or broken
2 of 2 peoplefound this instruction helpful.
Michael from Fitchburg, WI
Really Easy
Less than 15 mins
Pliers
This repair was a snap. The parts, though not identical to the original, fit perfectly. I was able to snap both the Rack Slide Cap and the new wheel axle to the existing washer cage and the machine works great now.
Removed the stops at the end of the upper rack, removed the old rollers. Replaced with new rollers and installed the stops back in place. Very easy, finished in less than 15 minutes. Replacement rollers very much improved with design from the original rollers.
Was this helpful?
Thank you for voting!
Old parts showing wear
2 of 2 peoplefound this instruction helpful.
Suzanne from CHEYENNE, WY
Really Easy
Less than 15 mins
Watched a YouTube video on disassembly, parts replacement, and reassembly.
pieces that attach the wheels to the lower rack kept falling off
3 of 5 peoplefound this instruction helpful.
Laverne from Roselle, IL
Really Easy
Less than 15 mins
Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.
Was this helpful?
Thank you for voting!
Rack was rusted and broken.
2 of 2 peoplefound this instruction helpful.
Amelia from PEORIA, IL
Very Easy
Less than 15 mins
It was a very simple replacement. I took the old one out and rolled the new one in. It took less than 5 minutes!
Was this helpful?
Thank you for voting!
leg fell off of bottom rack.
2 of 2 peoplefound this instruction helpful.
Jonni from VACAVILLE, CA
Very Easy
Less than 15 mins
Slid it in. Very easy and the replacement part is built better than the original part.
Was this helpful?
Thank you for voting!
Bottom dishwasher rack rusted out
2 of 2 peoplefound this instruction helpful.
John C from SPRINGFIELD, VA
Very Easy
Less than 15 mins
Simple install- just roll it in. Fit perfect. Better design than OEM part. Perfect.
Was this helpful?
Thank you for voting!
One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.
3 of 5 peoplefound this instruction helpful.
Sheila from DEERFIELD, IL
Very Easy
15 - 30 mins
Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.
Was this helpful?
Thank you for voting!
Leaked front right side
2 of 2 peoplefound this instruction helpful.
robert from HAYMARKET, VA
Really Easy
15 - 30 mins
Pliers
Followed the instructions that came with the my order
Was this helpful?
Thank you for voting!
Lower wheels kept falling off
3 of 5 peoplefound this instruction helpful.
helmut from EAST KINGSTON, NH
Really Easy
Less than 15 mins
Installed new lower rack wheel kit
Was this helpful?
Thank you for voting!
NONE
3 of 5 peoplefound this instruction helpful.
Edward from GRAND BLANC, MI
Very Easy
Less than 15 mins
Pliers
UNPACKED WHEELS AND CLIP. USING NEEDLE NOSE PLIERS SQUEEZED WHEEL TIP TO INSERT IN WHEEL. REMOVED OLD WHEELS AND RETAINER BY HAND. INSTALLED NEW WHEELS INSTALLED AND NEW RETAINERS
My Orders
