EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3XART73 Whirlpool Refrigerator - Instructions

All Instructions for the 3XART73
121 - 135 of 1083

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice container wouldn't dispence
10 of 14 people found this instruction helpful.
  • Dennis from Cheney, KS
  • Really Easy
  • Less than 15 mins
I simply replaced the entire ice container and auger assembly. I intend to repair the old assembly for use as a spare if the new one ever has problems in the future.
Was this helpful?
Thank you for voting!
tube got cut and it leaked
9 of 11 people found this instruction helpful.
  • Robert G. from Kalkaska, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
first I turned off the water supply then I removed screw that was holding the nozzle and pulled out the tube then I pried out the face plate by prying from the bottom with a thin screw driver then I unpluged the wire harness so I could access the black tube guide that the white tube was housed in before it was cut I pushed the new white tube down threw the black tube and out the bottom hinge I replaced the nozzle screw plugged the harness back in replaced the face plate went to the bottom and connected the tube to the other half replaced the bottom molding and turned on the water
Was this helpful?
Thank you for voting!
My drawer had been broken and I needed a new one.
8 of 9 people found this instruction helpful.
  • Jennifer from Birmingham, AL
  • Really Easy
  • Less than 15 mins
When I took the pan out of the box, it was not the exact same as the one I had. But it fit perfect. The only hard part was the fact that it looked so good I had to clean the entire fridge side. (Smile)
Was this helpful?
Thank you for voting!
The shelf runner broke
10 of 15 people found this instruction helpful.
  • Andrew F from Media, PA
  • Really Easy
  • Less than 15 mins
Took out the old one and put in the new one. No tolls required. It did give me the opportunity to clean the back wall of the refrigerator.
Was this helpful?
Thank you for voting!
I just ordered a replacement door bin
8 of 9 people found this instruction helpful.
  • Debora from BARTLETT, TN
  • Very Easy
  • Less than 15 mins
because one of mine got broken somehow over the years and I ordered an extra door bin because I had space for one and needed the extra room for more small jars of condiments etc. I also ordered an extra shelf for more storage room for food dishes etc. instead oJust placed them in position on the door and on the back grid.
Simple and done !!!
Was this helpful?
Thank you for voting!
Broken Crisper Frame And Pan
9 of 12 people found this instruction helpful.
  • Mauricio from National City, CA
  • Really Easy
  • Less than 15 mins
Jus took me seconds to replace both items. No problem.
Was this helpful?
Thank you for voting!
Worn Down Upper And Lower Cam
8 of 9 people found this instruction helpful.
  • Jose from Corona, CA
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
Took off refrigerator door from top hinge and lifted off. A little difficulty getting worn out parts off (needed dremel to drill out worn plastic); replaced with new parts, the screw head holding on the part was starting to be worn as well but still worked. If I hadn't got to this repair soon the bottom of the door aluminum would have t otal worn out as it is, it has a deep groove but not noticeable. The new cams also force the door closed tight instead of slightly ajar at times.
Was this helpful?
Thank you for voting!
replacing thermostat did not help
10 of 15 people found this instruction helpful.
  • John from Rocky River, OH
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set
Icecubes came out half-way, and refrooze. I figured out, that the melter does not work (HEATER in the icemaker) Voltage measured 105V no load. Studied the Internet, and folloved an advice: shorted the back wire and the blackwire with white stripes.these go to relay contacts. It seems, that the relay contacts are no good on Infrared receiv er boaed. I turn off manually the icemaker, when needed
Was this helpful?
Thank you for voting!
Chrisper pan support cracked due to overfilling
9 of 13 people found this instruction helpful.
  • David from Lenexa, KS
  • Easy
  • Less than 15 mins
removed old shelf support after taking out the glass and support. New part was a perfect fit that was a "shap: to put in.
Was this helpful?
Thank you for voting!
35 year old water tube became brittle and cracked; leaking water
8 of 10 people found this instruction helpful.
  • Melvin from OPELIKA, AL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.
Was this helpful?
Thank you for voting!
Ice dispenser auger would not rotate and drop ice
8 of 10 people found this instruction helpful.
  • jay from Sarasota, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First, I replaced the auger motor at a cost of $87.00. That job took about 15 minutes and was very easy, but it still didn't work. So, I took off the front panel that covered the ice/water dispenser controls and some white plastic parts rained down out of it. I then discovered the problem was the mounting points that held the ice dispe nser switch in place. The $13.00 white control bracket fixed the problem. Should have checked this first, as I later learned that the motors rarely go bad.
Was this helpful?
Thank you for voting!
ice chute broke
7 of 8 people found this instruction helpful.
  • Cathy from North Liberty, IA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Just like they told me to do.Insert bottom then sides.
Was this helpful?
Thank you for voting!
old gasket was not sealing door would open when freezer door closed
20 of 47 people found this instruction helpful.
  • clive from parlin, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
remove door pull gasket out put new gasket in replace door
Was this helpful?
Thank you for voting!
water nozzle was cracked and leaked
7 of 8 people found this instruction helpful.
  • Stephen from Harahan, LA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the screw holding the nozzle in place, and removed the other end of the line under the refrigerator to give me some slack. Then I clipped the nozzle off of the black line and taped the new line to the end I cut off with electrical tape. Then I just snaked it down through the hole with me pulling from the bottom and my wife pushi ng from the top and reattached both ends. Make sure you don't use too much tape becaue it won't fit throught the hole at the bottom. I taped them together at an angle so not to make tape too thick. Also, you can snake it back from the bottom if the tape breaks and the old line comes out of the fridge.
Was this helpful?
Thank you for voting!
Broken Piece
7 of 8 people found this instruction helpful.
  • anthony from georgetown, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Had to disassemble ice maker to install part. . .
Was this helpful?
Thank you for voting!
All Instructions for the 3XART73
121 - 135 of 1083