EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3867V Magic Chef Range - Instructions

All Instructions for the 3867V
121 - 135 of 422

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace broken bake element
1 person found this instruction helpful.
  • Frances from MOREHEAD, KY
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged the range. Took our the oven shelves. Unscrewed the bars holding the broken bake element to the back of the oven wall. Gently pulled out the wiring to which the bake element is attached. Slipped the ends of the broken bake element off the ending on the wiring. Then slipped the ends of the new bake element over the ends on the wiring. Then pushed the wiring with attached bake element back into their position behind the oven wall and attached the bars holding the bake element to the back of the oven wall. This is really easy because it is exactly like the on-line video, for I am a 75 year old female with little technical experience.
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person found this instruction helpful.
  • Carolyn S from white oak, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
The oven heating element burned out like a lit fuse!
1 person found this instruction helpful.
  • Herbert from Neenah, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!
Was this helpful?
Thank you for voting!
Element burned in half
1 person found this instruction helpful.
  • James from Allyn, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took two screws out unplugged the element and plugged the new one in and replaced the screws and turned the breaker back on. Works great...Piece of cake..jk
Was this helpful?
Thank you for voting!
Bake element would no longer heat up
1 person found this instruction helpful.
  • Joe from Schertz, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I unplug the stove first. Then took off two screws that held the bake element in place. Pulled off the connectors using the pliers. Had to use pliers because they were really snug. Plug in the wires to the new base element. Crimped down the connectors a little bit to make sure they were snug. Inserted the bake element back into the holes at the back of the oven. Put the two screws back in. Plugged the oven back in and turned it on to make sure it worked. Lastly, tossed the old bake element in the trash. Really easy job. Glad I didn't pay anybody to do this.
Was this helpful?
Thank you for voting!
Previous element burnt up
1 person found this instruction helpful.
  • Betsy from Sun City, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I let my husband to the work...But it was very easy. I could have done it! He removed the screws, pulled the wires off previous element. Reattached the wires to the new element and screwed the ends back in place.
Was this helpful?
Thank you for voting!
oven not heating to set temp. 100 degrees too cold
2 of 4 people found this instruction helpful.
  • Robert from Funston, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
installed part,turned unit on-temp still cold. reset digital control, up 35 degrees, still cold. un-plugged unit,re-connect after 10 min. still cold.
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person found this instruction helpful.
  • Hudson from Cockeysville, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
bakeing element caught fire.
1 person found this instruction helpful.
  • Leticia from Sunnyvale, CA
  • Really Easy
  • Less than 15 mins
First I turned off power to the range at the fuse box (very important-The last time I didn't do this and ended up paying a repairman $150.00 to replace the damaged connectors). I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the new ele ment, pushed the element back in and replaced the screws. Turned the power back on and tested the element. The whole job took about 30 minutes because I had trouble disconnecting the old element. I used the flat end of the scrapper to push against the connector while I pulled the element out. Normally it would take only about 15 minutes.
Was this helpful?
Thank you for voting!
element burnt into.
1 person found this instruction helpful.
  • John from Overton, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The part came quick and packed very well. I moved the stove out and un pluged it. opened oven door and took a philips screwdriver and took the screws out at the back of element..Slid it out with the two wires attached and unpluged the conectors. pluged the conectors on to the new element and slid it back in. Had a chocolate cake in 35 minuts.
Thanks, John in Texas
Was this helpful?
Thank you for voting!
Bake Element broke
1 person found this instruction helpful.
  • Joseph from Warwick, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
****Threw the breaker switch for the oven to the 'off' position****. Opened the oven. Unscrewed the phillips head screws at the back of the old element. Removed the connecting wire, taping them to the stove so that they wouldn't recede into the hole. Securely attached the connecting wires to the new element. Pushed the wires back into th e holes in the stove. Removed the tape from the oven. Screwed the element into place. ****Threw the breaker switch back to the 'on' position****. Process took under 10 minutes.

DO NOT FORGET TO UNPLUG OR TURN OFF BREAKER BEFORE DOING ANYTHING WITH THE WIRES. Don't forget to turn it back on again when you are done.
Was this helpful?
Thank you for voting!
hot spot in center of bake element appeared suggesting failure was imminent
1 person found this instruction helpful.
  • burton from prides crossing, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pulled breaker,removed oven door,removed 2 screws,pulled bake element out 3 inches,pulled connections off,pushed connectors on new element,pushed new element back and replaced screws,replaced oven door ,pushed breaker back and turned on oven and let it heat up to 350 degrees.
Total time 10 minutes,even a caveman could do it.
Was this helpful?
Thank you for voting!
BurntBaking Element Element
1 person found this instruction helpful.
  • Matt from Lewisburg, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turn Off the BREAKER!!!
Unplug the stove/oven
Opened the oven door
Unscrewed the baking element for the oven
Pulled the old element out about 3"
Disconnected the wire clip on both sides
Plugged the element into the clips
Screwed element back into place
Plugged oven in ,turned on breaker
PREST O DONE
Was this helpful?
Thank you for voting!
Bake element had burnt in half.
1 person found this instruction helpful.
  • Joyce from ROCHESTER, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched the video that was available and followed the instructions. Unplugged the stove first,removed the old element, and put the new one in. Video was very helpful and the installation was very easy. Was done in about 10 minutes.
Was this helpful?
Thank you for voting!
fireworks in the oven. Burned completely in two.
1 person found this instruction helpful.
  • Shelly from Allentown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connect ed the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!
Was this helpful?
Thank you for voting!
All Instructions for the 3867V
121 - 135 of 422