EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3845 - Instructions

All Instructions for the 3845
121 - 135 of 360

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
drain freezing up found cond fan not working
3 of 4 people found this instruction helpful.
  • glenn from la harpe, KS
  • Really Easy
  • Less than 15 mins
Cleaned oh t freezer removed floor. Removed back inside wall removed and replaced fan and put back removed parts


L
Was this helpful?
Thank you for voting!
Replace the door gasket on the freezer door of my top-freezer refrigerator
3 of 4 people found this instruction helpful.
  • Scott from NAPLES, FL
  • Very Difficult
  • 1- 2 hours
  • Socket set
Removed the door by removing the two screws holding it on. Do not try to do this repair with the door attached. Easily removed the old gasket. Getting the new one on the door was EXTREMELY difficult. I couldn't do it. After 90 minutes, I gave up and called my appliance repairman. When he arrived, he and I worked together to get the new ga sket on the door. It took 2 sets of hands to do this. It still took us about 40 minutes. My repairman had a few choice words about the design of the system holding the gasket on the door. Ditto for me. So the cost of my repair was doubled because I had to pay the repairman to help me attach the new gasket. I should have just bought a new fridge.
Was this helpful?
Thank you for voting!
gasket was not easily fitted
3 of 4 people found this instruction helpful.
  • neal j from COLUMBIA, SC
  • Very Difficult
  • More than 2 hours
I did not do the repair but observed a friend trying to replace gasket in refrigerator. It was a very difficult procedure. He works as a handyman so he knew what he was doing and had to manually fit gasket with some help with a hammer. Gasket did not go in easy and had to be forced to fit until job completed/
Was this helpful?
Thank you for voting!
light wouldn't come out of socket
3 of 5 people found this instruction helpful.
  • Joyce from Tacoma, WA
  • Really Easy
  • Less than 15 mins
It just unpluged and the new one plugged in. Simple. The part was reasonable and arrived very quickly. It sure is nice to have a light in the frig again.
Was this helpful?
Thank you for voting!
Broken shelf retainer bar end cap.
2 of 2 people found this instruction helpful.
  • Ruchik from Bronx, NY
  • Really Easy
  • Less than 15 mins
I ordered 2 end caps just to keep one as spare. Turned out I had ordered a size larger than the one already on the refrigerator. So I replaced both ends and it worked fine - with increased shelf space. Now I can even fit a gallon container with ease!!! Took about 20 seconds. I just wish there was an easier way to measure parts before orde ring. Otherwise, the entire process from order to finish took about 3 days.
Was this helpful?
Thank you for voting!
Shelt guides were broken in vege drawer and same problem with meat pan guides
2 of 2 people found this instruction helpful.
  • ART from WHITESTONE, NY
  • Very Easy
  • Less than 15 mins
Replaced drawer shelf and meat pan
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
The Refridgerator and Freezer were not cooling.
2 of 2 people found this instruction helpful.
  • Frank from VERO BEACH, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Installing the part repaired the fridge and freezer immediately.
Was this helpful?
Thank you for voting!
freezer stoped freezing
2 of 2 people found this instruction helpful.
  • paul from ENDICOTT, NY
  • Very Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
my freezer quit freezing, it would freeze for one day, thaw the next, so I went online, found PARTS SELECT, LOOKED UP MY MODEL #, come to find out it needed three parts to keep my freezer to freeze, first part was a thermistor a small PART took me longer to remove all the covers, and shelving, PULLED THE OLD OUT, CUT THE WIERS TO SIZE, AND REINSTALLED, IT WELL! THAT WASN'T ENOUGH THE FREEZER STILL DIDN'T FREEZE IT THOUT IT WAS A COOL WORMING OVEN, HAD TO INSTALL THE THERMISTOR I, SO I DID, TEN MIN, NOW I THOUGHT THAT WAS IT BECAUSE IT STAYED FROZEN FOR A WEAK, HAVE YOU EVER EATEN SOUPY ICE CREAM? SO BACK TO PARTS SELECT, THIS TIME I BOUGHT ONE MORE PT, THE RUN CAPACITOR, FIVE MIN, THAT/S ALL IT TOOK TO INSTALL. I DID NOT KNOW AT THE TIME YOU NEED THE THREE OF THEM TO RUN THE FREEZER ONE TO KEEP THE TEMP., ONE TO KEEP THE FAN RUNNING THE WAY IT SHOULD, AND THE THIRD TO MAKE SURE THE OTHER TWO KEEP RUNNING. NOW I CAN SET IT AT 4- 5 AND. FREEZE.
Was this helpful?
Thank you for voting!
Was getting too cold
2 of 2 people found this instruction helpful.
  • Jose A from WEST PALM BCH, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Was only two screws after that carefully took the part away unplugging the wires at the same time was plugging in to the new part and was done after 5 or 7 min
Was this helpful?
Thank you for voting!
Broken shelf frame
2 of 2 people found this instruction helpful.
  • Yvonne from FORESTVILLE, NY
  • Really Easy
  • Less than 15 mins
Easy
Was this helpful?
Thank you for voting!
Shelf was cracked on both sides
2 of 2 people found this instruction helpful.
  • Marcella from SPRINGFIELD, MA
  • Really Easy
  • Less than 15 mins
I first washed old shelf to make sure glass will easily slip out. Installed old glass and replaced.
Was this helpful?
Thank you for voting!
the old shelf was brittle and breaking off in the front support corners.
2 of 2 people found this instruction helpful.
  • Kim from LABELLE, FL
  • Very Easy
  • Less than 15 mins
I ordered the new part from PartSelect and it was delivered very quickly. I removed the part from the box, laid the old glass shelf inside if it and placed it in the fridge. No tools required, and then slid the vegetable drawers into it and replaced the food. Very satisfied with my purchase experience.
Was this helpful?
Thank you for voting!
Cap on the door retainer bar broke.
2 of 2 people found this instruction helpful.
  • Mary from New Milford, NJ
  • Really Easy
  • Less than 15 mins
The replacement cap fit perfectly. Unfortunately when the orinigal cap broke it tookout a small piece of the surrounding plastic leaving nothing for the new cap to catch. I have the piece and tried several kinds of glue but nothing holds it securely enough. I would however readily recommend your company. The service was terrific.
Thank you.
Was this helpful?
Thank you for voting!
I didn't know if I could get a replacement part, but I googled "replacement parts" (or some such), and since this website looked easy to navigate, chose it. (Actually, I did my ordering via telephone). The sales rep. helped me clarify which part I needed, I ordered it, and received the part the very
2 of 2 people found this instruction helpful.
  • Kaye from San Francisco, CA
  • Really Easy
  • Less than 15 mins
I simply snapped the two end pieces into place, attaching the guard rail. It was like putting the pieces of a very easy puzzle together‚ especially for someone like myself who is mechanically challenged.
Was this helpful?
Thank you for voting!
All Instructions for the 3845
121 - 135 of 360