EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3842 - Instructions

All Instructions for the 3842
16 - 30 of 465

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced drip bowls in stove
71 of 134 people found this instruction helpful.
  • Liza from College Point, NY
  • Really Easy
  • Less than 15 mins
Took out the old drip bowls and replaced with new bowls.
Was this helpful?
Thank you for voting!
Burned terminal block and filter board
95 of 208 people found this instruction helpful.
  • Joseph from Decatur, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!
Rented appartment in which none of the drain pans were the proper size making it very difficult to cook
67 of 131 people found this instruction helpful.
  • Grace Mary from Canton, OH
  • Really Easy
  • Less than 15 mins
I removed the element and then the drain pan and replaced with the new correct pans. I replaced the element and all was well.
Was this helpful?
Thank you for voting!
element went bad..started burning like a weld
20 of 21 people found this instruction helpful.
  • Randall from Williamsburg, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off the power at the breaker box. Removed the two screws, pulled the element out about 3 inches, disconnected the two wires, reconnected the two wires to the new element, inserted element back into place, screwed in the screws...all finished...works great! Delivery was super fast...just a great experience all the way around.
Was this helpful?
Thank you for voting!
bake element cracked
19 of 24 people found this instruction helpful.
  • Ruth from Moyock, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Being a woman, I first cleaned the oven. Removed two screws holding the element in place. Pulled element out about 3 inches and disconnected one clip attached to a yellow wire another clip attached to a green wire. Put new element in connected clips. Replaced screws.
Was this helpful?
Thank you for voting!
Chipped and discolored pans
17 of 19 people found this instruction helpful.
  • Susan A from Millsboro, DE
  • Really Easy
  • Less than 15 mins
This purchase was for replacement parts, not for repair. Installation was a simple matter of taking out the old and installing the new, which is extremely easy to do. One item was damaged; Parts Select was absolutely fantastic to deal with regarding replacement! One word of caution regarding the product - I mistakenly ordered Whirlpoo l drip pans which have an opening in the bottom, the Maytag pans don't. Initially I thought that it was a mistake by Parts Select; which wasn't the case. The pans fit perfectly so I kept them. If I reorder, I will be certain that I order the correct pans.
Was this helpful?
Thank you for voting!
My wife destroyed the oven door seal with oven cleaner...
14 of 16 people found this instruction helpful.
  • David from Bexley, OH
  • Really Easy
  • Less than 15 mins
I ordered the part one afternoon. It arrived before noon the next day. Then I simply removed the old seal (with about 2 dozen spring clips). Inserted the new part by carefully inserting the new seal into its corresponding hole at each end and then worked my way around the seal while inserting each attached spring clip into its correspon ding hole.
Was this helpful?
Thank you for voting!
installed new switches and elements
17 of 25 people found this instruction helpful.
  • Robert from Santa Fe, NM
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
just move one wire at a time. Each switch has 5 wires and I am sure mixing them would not be good.

Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.

Thanks PartSelect
Was this helpful?
Thank you for voting!
Broken burner and old drip pans not able to get clean
13 of 14 people found this instruction helpful.
  • Karen from Hillsboro, IL
  • Really Easy
  • Less than 15 mins
Actually, no repair was needed. I just removed the old drip pans and my burners snap in and out, so it could not have been easier! I simply looked up the parts on your web-site, ordered and completed my transaction in about 5 minutes. The parts were delivered in two days - amazing! It could not have been easier!!!!!! I don't like to shop and this would have taken me forever to find a place that would have helped me locate parts.
Was this helpful?
Thank you for voting!
The oven would not heat properly
13 of 14 people found this instruction helpful.
  • Philip from Edgewood, KY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Pulled the oven away from the wall. Removed two screws inside the oven. Pulled old heating element out. When I did I heard a loud pop and and saw smoke. I assumed the element would not be electrically live if the oven was not on. That was obviously incorrect. I pulled the plug and then completed the installation. I went to chruch o n Sunday and thanked God that I was not electrocuted. Now the oven works fine. My wife wanted the oven to die so that she could get a new alppliance, Instead I am alive.

Seriously your service was great. Your web site pointed me to the correct part, and it arrived the next day! I would definitely use your service again if I remember your name.
Was this helpful?
Thank you for voting!
Broken drawer glide
13 of 15 people found this instruction helpful.
  • Peter J from Valparaiso, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
As I pulled the drawer looking for a pan stored in bottom drawer the drawer glide broke. The pictures of the parts were fantastic. Not being sure of which of two parts from the photos, I ordered two parts knowing that hopefully one would be the correct one and the other would not be the part I needed. Parts arrived and it was clear whic h of the two parts would fit perfectly.

I screwed in the part, and that was it , and I was relieved that the problem was solved! I kind of feel lucky that your company is in business! The other part is fully accepted and plan to send it back in for a refund. And oh yes, I solved my appliance problem under $20.00 - unbelieveable these days!

Thank you again for beng there!
Was this helpful?
Thank you for voting!
Rubber gasket failed due to age
14 of 18 people found this instruction helpful.
  • Mary from Woodland, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I learned that I could clean the window in the oven door. In taking it apart I saw that the gasket had fallen into the oven door. I found the part online, it arrived in three days. I removed the metal part of the door, removed what was left of the old gasket and put in the new one. Put the metal part of the door back on, and it was as g ood as new.
Was this helpful?
Thank you for voting!
Oven door wouldn't close or open all the way
14 of 20 people found this instruction helpful.
  • Michael from St. Cloud, MN
  • Easy
  • 30 - 60 mins
  • Screw drivers
1st removed the sealed burners
2nd removed stove top
3rd removed oven door
4th removed left and right side pannels to access door hinges
5th removed left and right hinges
6th installed new left and right hinges
then re-installed other components in reverse order.
The oven door now opens and closes proper ly, the heat stays in the oven!!
Was this helpful?
Thank you for voting!
Spring on hinge broke. Door wont close totally
12 of 15 people found this instruction helpful.
  • Thomas from Baton Rouge, LA
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set
Using the description on the first DIY, I did as told. All went well until the part about removing the panel to access the hinge. There isn't a "panel" on the side of this particular model of Magic Chef stove. You have to remove the entire side of the stove, and then, there's another panel inside of this one. That too has to come off. On ce off, you're into the insulation surrounding the oven. Ain't pretty, I'll assure you. Then, the replacement hinge has holes in it for the mounting screws. The holes aren't threaded, and you have to replace the screws that come with the hinge with self-tapping screws. Either that, or thread the holes with a tap. Thank goodness my wife loves the stove, or it may have just gone out the door. This is not one of Magic Chefs better ideas. Either that, or they didn't plan on having to replace the hinge before the stove wore out.
Was this helpful?
Thank you for voting!
Burner was out but the burner coil worked on onother burner
10 of 10 people found this instruction helpful.
  • Richard from Orange, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.
Was this helpful?
Thank you for voting!
All Instructions for the 3842
16 - 30 of 465