3841 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced drip bowls in stove
71 of 134 people
found this instruction helpful.
-
Liza from College Point, NY
- Really Easy
- Less than 15 mins
Took out the old drip bowls and replaced with new bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burned terminal block and filter board
95 of 208 people
found this instruction helpful.
-
Joseph from Decatur, GA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set, Wrench set
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem.
Was this helpful?
Thank you for voting!
Relay
42 of 54 people
found this instruction helpful.
-
John H from Austin, TX
- Really Easy
- 15 - 30 mins
Removed back panel. Opened cover to relay attached to the compressor and pulled off replacing with new relay. No problem.
Better than paying $250 for someone else to do it.
Better than paying $250 for someone else to do it.
Was this helpful?
Thank you for voting!
Rented appartment in which none of the drain pans were the proper size making it very difficult to cook
67 of 131 people
found this instruction helpful.
-
Grace Mary from Canton, OH
- Really Easy
- Less than 15 mins
I removed the element and then the drain pan and replaced with the new correct pans. I replaced the element and all was well.
Other Parts Used:
Was this helpful?
Thank you for voting!
element went bad..started burning like a weld
20 of 21 people
found this instruction helpful.
-
Randall from Williamsburg, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
Turned off the power at the breaker box. Removed the two screws, pulled the element out about 3 inches, disconnected the two wires, reconnected the two wires to the new element, inserted element back into place, screwed in the screws...all finished...works great! Delivery was super fast...just a great experience all the way around.
Was this helpful?
Thank you for voting!
This refrigerator had pawer( lite was on) but nothing turning--motor or fan. Turned control temperature min-max - no cange.
49 of 112 people
found this instruction helpful.
-
HAE-YOUNG from Douglaston, NY
- Easy
- 1- 2 hours
-
Screw drivers
Found burned Defrost timer contacts.
Was this helpful?
Thank you for voting!
bake element cracked
19 of 24 people
found this instruction helpful.
-
Ruth from Moyock, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
Being a woman, I first cleaned the oven. Removed two screws holding the element in place. Pulled element out about 3 inches and disconnected one clip attached to a yellow wire another clip attached to a green wire. Put new element in connected clips. Replaced screws.
Was this helpful?
Thank you for voting!
My wife destroyed the oven door seal with oven cleaner...
14 of 16 people
found this instruction helpful.
-
David from Bexley, OH
- Really Easy
- Less than 15 mins
I ordered the part one afternoon. It arrived before noon the next day. Then I simply removed the old seal (with about 2 dozen spring clips). Inserted the new part by carefully inserting the new seal into its corresponding hole at each end and then worked my way around the seal while inserting each attached spring clip into its correspon
... Read more
ding hole.
Read less
Was this helpful?
Thank you for voting!
installed new switches and elements
17 of 25 people
found this instruction helpful.
-
Robert from Santa Fe, NM
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
just move one wire at a time. Each switch has 5 wires and I am sure mixing them would not be good.
Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect
Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect
Other Parts Used:
Was this helpful?
Thank you for voting!
The oven would not heat properly
13 of 14 people
found this instruction helpful.
-
Philip from Edgewood, KY
- Really Easy
- 15 - 30 mins
-
Nutdriver
Pulled the oven away from the wall. Removed two screws inside the oven. Pulled old heating element out. When I did I heard a loud pop and and saw smoke. I assumed the element would not be electrically live if the oven was not on. That was obviously incorrect. I pulled the plug and then completed the installation. I went to chruch o
... Read more
n Sunday and thanked God that I was not electrocuted. Now the oven works fine. My wife wanted the oven to die so that she could get a new alppliance, Instead I am alive.
Seriously your service was great. Your web site pointed me to the correct part, and it arrived the next day! I would definitely use your service again if I remember your name.
Seriously your service was great. Your web site pointed me to the correct part, and it arrived the next day! I would definitely use your service again if I remember your name.
Read less
Was this helpful?
Thank you for voting!
Freezer was cold, but frig was warm
13 of 18 people
found this instruction helpful.
-
Joy from New Ross, IN
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
First unplugged frig. Took off cover to fan, then bottom & back panels in freezer. Unplugged the fan to the wires & marked them so we would know how they went back. Unscrewed the frame that holds the fan, laid the old one next to the new one so we could tell how it went. Only took a few minutes to do this, then put it back in the same way
... Read more
we took it out. Plugged frig. back in & it took off. Very happy with this. Runs like a new one.
Read less
Was this helpful?
Thank you for voting!
Light in the refrigerator went out
13 of 18 people
found this instruction helpful.
-
Paulette B. from Santa Ana, CA
- Really Easy
- 15 - 30 mins
After I bought what I thought I needed for the repair. I asked a friend to come over and look at it. He changed the
the light socket and put the same light bulb in and it works great. I am returning the light switch but decided to keep the light bulb.
Getting on the internet was so easy. This was really very simple. ... Read more Thank you for making what I thought would be a big ordeal into something very simple.
Paulette Johnson
the light socket and put the same light bulb in and it works great. I am returning the light switch but decided to keep the light bulb.
Getting on the internet was so easy. This was really very simple. ... Read more Thank you for making what I thought would be a big ordeal into something very simple.
Paulette Johnson
Read less
Was this helpful?
Thank you for voting!
Burner was out but the burner coil worked on onother burner
10 of 10 people
found this instruction helpful.
-
Richard from Orange, CA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select.
Was this helpful?
Thank you for voting!
The oven stopped heating
10 of 11 people
found this instruction helpful.
-
GENE from TRENTON, SC
- Really Easy
- Less than 15 mins
-
Screw drivers
First I swiched off the circuit breaker just to be safe.Then I removed the two mounting screws and disconnected the the element leads. Very easy task, approx 5 mins. THANKS
Was this helpful?
Thank you for voting!
Fridge keeps cycling on and off and a clicking sound happens every time compressor cycles.
10 of 11 people
found this instruction helpful.
-
Kirk E from GRASS VALLEY, CA
- Easy
- Less than 15 mins
-
Screw drivers
I opened the back panel of the fridge and exposed the compressor. Unplugged existing run capacitor and installed new one with the addition of the sleeve that is stated must be installed around the run capacitor.
Everything I read and on this web site says that based on these symptoms, that the problem is the run capacitor. I search ... Read more ed and search for a part called a start relay which plugs in to the compressor. This run capacitor plugs in to this other part which I take as the start relay.
Installing this run capacitor did not solve the problem. The fridge compressor keeps cycling on and off. Freezer doesn't keep as cold as it should.
Everything I read and on this web site says that based on these symptoms, that the problem is the run capacitor. I search ... Read more ed and search for a part called a start relay which plugs in to the compressor. This run capacitor plugs in to this other part which I take as the start relay.
Installing this run capacitor did not solve the problem. The fridge compressor keeps cycling on and off. Freezer doesn't keep as cold as it should.
Read less
Was this helpful?
Thank you for voting!