EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3837 - Instructions

All Instructions for the 3837
121 - 135 of 180

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Starter/overload assembly and run capacitor were bad
  • Colby from Blanding, UT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good.
Was this helpful?
Thank you for voting!
frig door kept slamming into cabinet
  • Anthony from Riverview, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took the old stop off put the new stop on
Was this helpful?
Thank you for voting!
refig light did not work
  • paul from east hanover, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
per your instructions
Was this helpful?
Thank you for voting!
Refrigerator and freezer drawer would not maintain set temperature
  • James from Bel Air, MD
  • A Bit Difficult
  • 30 - 60 mins
  • Socket set
Condenser fan motor was running slow. This was not a problem included in your list of possible problems. I thought that maybe the capacitor was bad but have no way to check it. So I ordered one. when I received it, I installed it. That was not the problem. So I ordered a fan motor and installed it. That was not the problem. So finally I o rdered a control board and installed it. That solved the problem. So maybe you should put "cond.fan motor runs slow" in your list of possible faults and what causes that problem. Capacitor was easy to install, simply remove the cover plate, flip off retaining wire, unplug the capacitor and replace. Fan motor was a bit more difficult. It must be removed from mount after fan scroll is removed. Remove one screw that holds scroll, bend the top down and remove. Then pull hard on fan blade to remove it. It must be installed on new motor. Two screws in frame mount can be removed with some effort if you have a 1/4" drive ratchet with a Phillips screwdriver bit. Then pull frame open and install new motor. Push fan blade on new motor shaft hard. Replacing control board was easy. I used a pair of long nose pliers with 90 degree bend to get mounting pins closed to pull board off.
Was this helpful?
Thank you for voting!
install second set pan sliders
  • William from Rockville, MD
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Because the kit did not include fasteners, had to use wood screws and superglue.
Was this helpful?
Thank you for voting!
broking slide
  • Anthony from Painter, VA
  • Easy
  • 15 - 30 mins
replace the bar lift top off
Was this helpful?
Thank you for voting!
defrost timer was bad
  • Reese from Coconut Creek, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
repalaced the old one with the new one. easy
Was this helpful?
Thank you for voting!
Refrigerator section too warm
  • Ken from Chapel Hill, NC
  • Easy
  • 1- 2 hours
  • Socket set
I followed advice from other posts on this web site. The only thing additional I'd recommend is to take pictures of assemblies before you disassemble them. A neighbor gave me that useful tip. It should be noted that I first noticed my refrigerator failure back on June 22, 2012. I hired a reputable local repair service to fix it. They replaced the Defrost heater (item 618) and charged me $ 208.14. Then on August 22nd, I noticed that the problem resurfaced. I decided to fix it myself using info from site. The repair went well, and I'm hopeful that it will stay repaired. Kudos to this site!
Was this helpful?
Thank you for voting!
Freezer work refierator compartment is warm
  • KIRK from Malibu, CA
  • Easy
  • 1- 2 hours
  • Screw drivers
Defrost timer is hidden in the control panel in the refrigerator top middle. Turn to off and remove two screws which are hidden behind white tabs. I had to pry the old timer from the plug with a screw driver because it was tight. Try not to short across the terminals. Plug in the new timer. Replace it in the clip where you got old one and reinstall the controls. The freezer was still all frosted up so I had to remove the cover and defrost it with a hair dryer to get it to work. Then I turned it on and it works great.
Was this helpful?
Thank you for voting!
a lot of ice in the freezer-and in the refrigerator is warm
  • STOYAN from ARLINGTON HEIGHTS, IL
  • Really Easy
  • 30 - 60 mins
HI I am Stoyan. I had a problem with my refrigerator. The freezer produces a lot of ice, but the refrigerator was warm. I try to find what other people comment on this site partselect.com. I decided that the thermostat is damaged. I ordered the thermostat from partselect.com and I had the delivery within 24 h. and I was very happy with t he fast delivery service .I saw a video on the same site how they show how to do myself the change of the thermostat. I took the hairdryer from my wife to defrost the refrigerator for 40 minutes and removed the old thermostat. I decided to test the heater with a 9 volts electricity from a portable charger for a car. I made an electric circuit chain and on the end of the heater I saw that there was 9 volts electricity and I understood they are ok. I changed the thermostat for 5 minutes, looking very carefully to match the colors of the cables. For $ 11, I saved money to buy a new refrigerator or pay a big bill to a repair service. Thank you for the video that helped me very much. My refrigerator work well.
Was this helpful?
Thank you for voting!
refrig.not cooling.freezer ok.
  • Leroy Neal from Andrews, SC
  • Really Easy
  • 30 - 60 mins
removed freezer panel,found the evap.iced up,put defrost timer into defrost. wated five min.no heat used hair dryer to defrost evap.found termination visually defective.replace defective part.no call back.Iam a EPA certified universal technician.
Was this helpful?
Thank you for voting!
light switch quit working
  • David from Simpsonville, SC
  • Easy
  • Less than 15 mins
  • Screw drivers
removed the inside fridge electrical panel and swapped switches
Was this helpful?
Thank you for voting!
Refrigerator and freezer too warm
  • Paul from Andrews, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
1) This is a built-in refrigerator with the compressor, coils, etc. at the top. Turn off the breaker to the fridge. 2) Remove the front panel off the top (just push up and pull out). 3) Removed 2 screws to the old timer and carefully remove the plug. Plug the new timer in and screw in. 4) Since our fridge was heavily frosted up, we moved everything to another refrigerator and coolers and kept the refrigerator off until all panels were room temperature. 5) If you haven't cleaned the coil in a while, vacuum it with a soft brush attachment. 6) Turned back on and the refrigerator is cooler than ever!
Was this helpful?
Thank you for voting!
light would not stay on
  • Kenneth from Leavenworth, KS
  • Easy
  • Less than 15 mins
First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.
Was this helpful?
Thank you for voting!
failed light switch
  • Jules from Crowley, LA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.
Was this helpful?
Thank you for voting!
All Instructions for the 3837
121 - 135 of 180