EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3837 - Instructions

All Instructions for the 3837
106 - 120 of 180

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light socket missing in refrigerator
1 of 4 people found this instruction helpful.
  • Wayne from Issaquah, WA
  • Really Easy
  • Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
This part broke for whatever reason, I do not know.
0 of 1 people found this instruction helpful.
  • John D from Chevy Chase, MD
  • Really Easy
  • Less than 15 mins
  • Pliers
I needed a pliers to extract the shelf reatainer from its place in the door of the fridge.

I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.

Piece of cake.
Was this helpful?
Thank you for voting!
Broken door shelf retainer
0 of 1 people found this instruction helpful.
  • Bill from Prescott, AZ
  • Really Easy
  • Less than 15 mins
Just replace end cap and install. The beauty of this was the door was broken in the evening before July 4 when all retail had closed down early for the 4th weekend. I hit Part Select on the computer, scrolled down the partslist,looked at pictures and figured out from that the necessary piece I needed, hit the buy button and in less than 1 0 minutes had an order placed. July 7 UPS was at the door with the parts and my reefer was back in business. NO service call and no extra charges!!! Thank You, PartSelect!!!!
Was this helpful?
Thank you for voting!
Bad switch for door prevented interior light from coming on
0 of 1 people found this instruction helpful.
  • Patricia from Sylva, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of yo ur company & it's repair video. THANK YOU SO MUCH
Was this helpful?
Thank you for voting!
Fan stopped working, Ice maker burned out
0 of 1 people found this instruction helpful.
  • TODD from PLAINVILLE, CT
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Fan Quit So did the Ice Maker. $150.00 worth of parts plus my time. Also the Freezer Floor cracked for some stupid reason.
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people found this instruction helpful.
  • Roscoe G from ROCHESTER, NY
  • Very Easy
  • Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
The plastic bracket that holds the lower shelf in the refrigerator door broke
0 of 2 people found this instruction helpful.
  • Alan from La Jolla, CA
  • Really Easy
  • Less than 15 mins
The bracket arrived promptly after ordering by telephone and snapped into place easily.
Was this helpful?
Thank you for voting!
Cracked Dairy Door
0 of 3 people found this instruction helpful.
  • Fr Kerry from Washington, DC
  • Really Easy
  • Less than 15 mins
PartSelect shipped me the part and it arrived in less than 3 days. It took longer to unwrap the excellent packing than it did to pop the new door into place. Wonderful!
Was this helpful?
Thank you for voting!
Center slide missing on crisper drawer
0 of 4 people found this instruction helpful.
  • Deanna from Glendale, AZ
  • Really Easy
  • Less than 15 mins
Took out the drawers slipped the new track into place and replaced the drawers.
Was this helpful?
Thank you for voting!
light in freezer section not working
6 of 24 people found this instruction helpful.
  • Victor from Fort Myers, FL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Using plyers Pulled old switch down and out. Put new one in and pushed new switch up into position. The switch plugs into the contacts, no wiring needed. Worked like a charm. You saved me 200 dollars GE repair bill. Thanks
Was this helpful?
Thank you for voting!
Frezzer would freeze up, refrigerator stayed cold, solved the problem. Now the refrigerator seems to be running more than usual.
  • Henry from West Seneca, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Checked the defroster coil which is located behind the rear panel in the freezer compartment, it was still working. Followed the schematics down to the defrost timer, which is located in the lower front of the refrigerator and tried that. Plugged in the new part and the problem is solved.
Was this helpful?
Thank you for voting!
Freezer And Frig Both Warm And Compressor Would Not Run
  • joe from decatur, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
I replaced the thermostat, temperature sensor, and the run capacitor. . . Refrigerator still not cooling. I checked the start relay and measured the input terminals on the compressor for the correct resistance. . . Everything measured correctly. In a last ditch effort before calling for service, I pulled the main board, inspected it and saw the problem right away. One leg on the compression capacitor had desoldered itself. Got out my soldering iron and applied a good amount of solder to that point. Put everything back together and turn it on. . . Problem fixed. The compressor kicked on right away and started cooling the refrigerator.
Was this helpful?
Thank you for voting!
Added a Second Snack Pan
  • WILLIAM from CHESAPEAKE, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver
My fridge came with only a single snack pan, and since the glass shelves are identical I decided to order the parts needed for installing the second snack pan. The glass shelf is secured in front by a round plastic pin protruding from the side of the fridge. Once the shelf is lifted upward and free of this pin, the rear retaining ears on the metal shelf side brackets can be released from the vertical-slotted metal track at the rear of the fridge. Make certain that you have the Right and Left snack pan slides oriented correctly, and positioned on the correct side of the metal shelf brackets. You’ll need to thread two self-tapping screws into each of the snack pan slides: one near the front, and the other at the rear. These screws extend through the metal side brackets into pre-aligned holes in each pan slide. When this is completed, you can test-fit the new clear plastic pan slide (drawer) into the slides to make sure it fits correctly. All that's left to do is insert the retaining ears into the appropriate pair of slots at the rear, then lower the front of the glass shelf until it's properly positioned over the plastic support pin. Now you're ready to enjoy twice the snack pan capacity as before!
Was this helpful?
Thank you for voting!
The bottom part of fidge was warm with water droplets on the its ceiling.
  • Charles R from Renton, WA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed Ice shelf,
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart b rackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Was this helpful?
Thank you for voting!
frosting over and freezer not cold enough and not circulating cold air .
  • Erold from Alamosa, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Defrosted the refrigerator,power off and cut the 2 wires on thermostat and sodered the new one on and shrink tube sealed the wires,refrigerator works like new!
Was this helpful?
Thank you for voting!
All Instructions for the 3837
106 - 120 of 180