3834 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Refridgerator and Freezer were not cooling.
2 of 2 people
found this instruction helpful.
-
Frank from VERO BEACH, FL
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Installing the part repaired the fridge and freezer immediately.
Was this helpful?
Thank you for voting!
Not cooling the bottom
2 of 2 people
found this instruction helpful.
-
John M from SAN ANTONIO, TX
- Really Easy
- 15 - 30 mins
-
Socket set
Disconnect the refrigerator, remove & installed new fan evaporator motor
Was this helpful?
Thank you for voting!
The freezer just cool but could not freeze the water and the front of door is quite hot to touch.
2 of 2 people
found this instruction helpful.
-
Fred from FLUSHING, NY
- Really Easy
- 15 - 30 mins
-
Nutdriver
First I observe that the compressor motor is running since the freezer is cooling. The purchase of the condenser fan is initiated and when the part arrive it is just easy to reinstall the replacement condenser fan.
The problem on the front of the freezer door remains hot to touch and the compressor runs for a while and stop. ... Read more The freezer is cold but still could not freeze the water. Inspection of the condenser fan reveals that it is not running. The order for the condenser fan from PARTSELECT came in a few days. Cleaning of the condenser of lint was first done and the process of removing the defective fan is just easy so with the installation.
The refrigerator as of now is running in perfect condition!
The problem on the front of the freezer door remains hot to touch and the compressor runs for a while and stop. ... Read more The freezer is cold but still could not freeze the water. Inspection of the condenser fan reveals that it is not running. The order for the condenser fan from PARTSELECT came in a few days. Cleaning of the condenser of lint was first done and the process of removing the defective fan is just easy so with the installation.
The refrigerator as of now is running in perfect condition!
Read less
Was this helpful?
Thank you for voting!
light wouldn't come out of socket
3 of 5 people
found this instruction helpful.
-
Joyce from Tacoma, WA
- Really Easy
- Less than 15 mins
It just unpluged and the new one plugged in. Simple. The part was reasonable and arrived very quickly. It sure is nice to have a light in the frig again.
Was this helpful?
Thank you for voting!
Old end cap broke.
2 of 2 people
found this instruction helpful.
-
Travis from North Quincy, MA
- Really Easy
- Less than 15 mins
Put the new end cap on and snapped it into place, took about 5 seconds.
Was this helpful?
Thank you for voting!
The above door End Cap broke.
2 of 2 people
found this instruction helpful.
-
John from Northglenn, CO
- Really Easy
- Less than 15 mins
The repair just required snapping the new part on to the door shelf and then snapping the shelf in to the door.
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Was getting too cold
2 of 2 people
found this instruction helpful.
-
Jose A from WEST PALM BCH, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Was only two screws after that carefully took the part away unplugging the wires at the same time was plugging in to the new part and was done after 5 or 7 min
Was this helpful?
Thank you for voting!
Freezer is too hot
4 of 8 people
found this instruction helpful.
-
David from New York, NY
- Really Easy
- 15 - 30 mins
-
Screw drivers
Open the freezer panel which attached with screwws and locate the defrost thermmostate behind the back pannel. Cut off the old thermostat wires and connect the new wires.
Was this helpful?
Thank you for voting!
There was frequently a loud buzzing sound that would come from the freezer.
2 of 2 people
found this instruction helpful.
-
Jeffrey from SIOUX FALLS, SD
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I wouldn't have tried it without the excellent YouTube video that gave step-by-step instructions! I set up a laptop next to the refrigerator and watched each step then did it myself.
The instructions were very detailed and all of the parts looked exactly like what I was seeing. The only difference was that I didn't need to re ... Read more move the floor of the freezer to get to the fan motor.
I bought the fan motor, grommets (2), compression ring and fan blade because I wasn't sure which part was causing the problem, and figured that as long as I was in there I might as well put in all new parts.
As it turned out, I did not need the compression ring, because the new fan blade came with a compression ring on it. This was different from what was shown in the video.
Since doing the repair the freezer is now as quiet as it should be, which is a great relief. The project and the money spent were more than worth it. It was great not having to pay a repair man to do the work!
The instructions were very detailed and all of the parts looked exactly like what I was seeing. The only difference was that I didn't need to re ... Read more move the floor of the freezer to get to the fan motor.
I bought the fan motor, grommets (2), compression ring and fan blade because I wasn't sure which part was causing the problem, and figured that as long as I was in there I might as well put in all new parts.
As it turned out, I did not need the compression ring, because the new fan blade came with a compression ring on it. This was different from what was shown in the video.
Since doing the repair the freezer is now as quiet as it should be, which is a great relief. The project and the money spent were more than worth it. It was great not having to pay a repair man to do the work!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer was wet and there was no air coming out of the freezer fan. Unit was very noisy too.
2 of 2 people
found this instruction helpful.
-
Robert from BOULDER, CO
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
The video that was attached to the part order was good, but not exactly the same as my unit. One thing I recommend is that you cover up the drain below the evaporator coil with a piece of paper and tape it down, because as I was putting the motor back I dropped a screw and it fell down the drain. So I had to go buy a new screw.
Gi ... Read more ve the cost of a repair man coming to fix a refrigerator that cost only $450 to begin with, doing this repair was well worth my time. (But I also had another refrigerator to move things to and could take my time and wait while they replaced the faulty part they shipped me.)
Gi ... Read more ve the cost of a repair man coming to fix a refrigerator that cost only $450 to begin with, doing this repair was well worth my time. (But I also had another refrigerator to move things to and could take my time and wait while they replaced the faulty part they shipped me.)
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Fan motor was making an intermittent (very annoying) squealing noise.
2 of 2 people
found this instruction helpful.
-
Larry from SHERWOOD, MI
- Really Easy
- 30 - 60 mins
-
Nutdriver
Located the model number on the inside wall of the unit. Wanted to make sure to order the correct product.Because of the age of the refrigerator I ordered the rubber mounting grommets. In this model the mounting frame is built at an angle that makes the removal and reinstall very easy. Remove two screws and the motor is loose. The fan bla
... Read more
de easily pulls off the shaft of the motor . Clean up the fan and reassemble.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
The fan got very noisy.
2 of 2 people
found this instruction helpful.
-
Carol from ORANGE, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
My husband did the repair in 45 minutes and said it was very easy. The video made everything plain and simple.
Was this helpful?
Thank you for voting!
Defroster fan burned up
3 of 6 people
found this instruction helpful.
-
Peter M. from Lincoln Park, NJ
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Was this helpful?
Thank you for voting!
Fan making an intermittent loud noise
3 of 6 people
found this instruction helpful.
-
Jeanne from QUINCY, IL
- Very Difficult
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
Well the repair would have consisted of simply removing the old fan, and installing the new one, however, the replacement fan sent had a female connector on it, when it should have been a male connector. So, I had to take the connector off the old fan, and splice it onto the new one. This turned a really simple job into more of a project
... Read more
, which I was not planning on.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!