3801 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The end cap on the door shelf snapped off.
0 of 1 people
found this instruction helpful.
-
Miranda from Waterford, CT
- Really Easy
- Less than 15 mins
I pulled off the broken piece, ordered the new piece, and snapped it on. VERY SIMPLE.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people
found this instruction helpful.
-
Wayne from Issaquah, WA
- Really Easy
- Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
door shelf retainer broke off
0 of 1 people
found this instruction helpful.
-
Sheryl from Wyoming, MI
- Really Easy
- Less than 15 mins
First, I removed the broken end cap from refrigerator door. Then I snapped the new end cap into place. Repair took less than 5 minutes and required NO TOOLS! Easy!! Got my part in one day, Thanks.
Was this helpful?
Thank you for voting!
This part broke for whatever reason, I do not know.
0 of 1 people
found this instruction helpful.
-
John D from Chevy Chase, MD
- Really Easy
- Less than 15 mins
-
Pliers
I needed a pliers to extract the shelf reatainer from its place in the door of the fridge.
I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.
Piece of cake.
I found the part in the partSelect catalog, ordered it, opened the box, and snapped the replacement part into place. I then popped the Shelf retainer back into place where it belonged.
Piece of cake.
Was this helpful?
Thank you for voting!
The retainer latch broke
0 of 1 people
found this instruction helpful.
-
Gary from Clayton, NY
- Really Easy
- Less than 15 mins
Removed the shelf retainer and snapped the new one in. and reinstalled the shelf on the door.
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
Was this helpful?
Thank you for voting!
Broken door shelf retainer
0 of 1 people
found this instruction helpful.
-
Bill from Prescott, AZ
- Really Easy
- Less than 15 mins
Just replace end cap and install. The beauty of this was the door was broken in the evening before July 4 when all retail had closed down early for the 4th weekend. I hit Part Select on the computer, scrolled down the partslist,looked at pictures and figured out from that the necessary piece I needed, hit the buy button and in less than 1
... Read more
0 minutes had an order placed. July 7 UPS was at the door with the parts and my reefer was back in business. NO service call and no extra charges!!! Thank You, PartSelect!!!!
Read less
Was this helpful?
Thank you for voting!
door shelf cap was broken and shelf fell off the door
0 of 1 people
found this instruction helpful.
-
Lynn from Montvale, NJ
- Really Easy
- Less than 15 mins
-
Pliers
Removed the broken part with a pliers.
Inserted end cap into shelf, then into door.
PERFECT!!!
Thank you
Inserted end cap into shelf, then into door.
PERFECT!!!
Thank you
Was this helpful?
Thank you for voting!
Broken shelf support on the refrigator door
0 of 2 people
found this instruction helpful.
-
Matthew from Philaelphia, PA
- Really Easy
- Less than 15 mins
I matched the part I needed throught your web site. Then I called and spoke to a customer support person, and gave my personal information to her. I do not like giving my credit card numbers over the internet. Your site allows me to do that.
Was this helpful?
Thank you for voting!
The plastic bracket that holds the lower shelf in the refrigerator door broke
0 of 2 people
found this instruction helpful.
-
Alan from La Jolla, CA
- Really Easy
- Less than 15 mins
The bracket arrived promptly after ordering by telephone and snapped into place easily.
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
The bottom part of fidge was warm with water droplets on the its ceiling.
-
Charles R from Renton, WA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed Ice shelf,
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart b ... Read more rackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart b ... Read more rackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Read less
Was this helpful?
Thank you for voting!
Starter/overload assembly and run capacitor were bad
-
Colby from Blanding, UT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good.
Was this helpful?
Thank you for voting!
Freezer And Frig Both Warm And Compressor Would Not Run
-
joe from decatur, GA
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
I replaced the thermostat, temperature sensor, and the run capacitor. . . Refrigerator still not cooling. I checked the start relay and measured the input terminals on the compressor for the correct resistance. . . Everything measured correctly. In a last ditch effort before calling for service, I pulled the main board, inspected it and
... Read more
saw the problem right away. One leg on the compression capacitor had desoldered itself. Got out my soldering iron and applied a good amount of solder to that point. Put everything back together and turn it on. . . Problem fixed. The compressor kicked on right away and started cooling the refrigerator.
Read less
Was this helpful?
Thank you for voting!
Refrigerator and freezer drawer would not maintain set temperature
-
James from Bel Air, MD
- A Bit Difficult
- 30 - 60 mins
-
Socket set
Condenser fan motor was running slow. This was not a problem included in your list of possible problems. I thought that maybe the capacitor was bad but have no way to check it. So I ordered one. when I received it, I installed it. That was not the problem. So I ordered a fan motor and installed it. That was not the problem. So finally I o
... Read more
rdered a control board and installed it. That solved the problem. So maybe you should put "cond.fan motor runs slow" in your list of possible faults and what causes that problem. Capacitor was easy to install, simply remove the cover plate, flip off retaining wire, unplug the capacitor and replace. Fan motor was a bit more difficult. It must be removed from mount after fan scroll is removed. Remove one screw that holds scroll, bend the top down and remove. Then pull hard on fan blade to remove it. It must be installed on new motor. Two screws in frame mount can be removed with some effort if you have a 1/4" drive ratchet with a Phillips screwdriver bit. Then pull frame open and install new motor. Push fan blade on new motor shaft hard. Replacing control board was easy. I used a pair of long nose pliers with 90 degree bend to get mounting pins closed to pull board off.
Read less
Was this helpful?
Thank you for voting!
broken endcap
-
huey from covington, LA
- Really Easy
- Less than 15 mins
just pop it together
Was this helpful?
Thank you for voting!