3751 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer stopped working
9 of 13 people
found this instruction helpful.
-
Clifford from Melbourne, FL
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Pliers, Screw drivers
I noticed that if I unplugged the refrigerator and plugged it back in a while later it would start working but eventually would stop. I deduced the problem was likely the defrost thermostat. I ordered the thermostat but it was in a difficult place behind the evaporator coil which I could not remove. While I was trying to work it into posi
... Read more
tion my hand pressed against the defrost coil and shattered the glass sheath. I ordered the coil and finally managed to get it and the thermostat installed. The refrigerator seems to work fine now.
Read less
Was this helpful?
Thank you for voting!
Evaporating fan not working
7 of 8 people
found this instruction helpful.
-
flor from glen cove, NY
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I did folllow the instructions on the video step by step.
Other Parts Used:
Was this helpful?
Thank you for voting!
Refridgerator wouldn't cycle into defrost mode without doing it manually.
9 of 14 people
found this instruction helpful.
-
Ben from Warrior, AL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I removed the shield over the timer and the part that supported the timer. Just unpluged it and pluged in new timer and put back shield. I had already replaced the defrost heaters which had totally burned up. I also replaced the thermostat while I was making the repairs although the old one was still o.k. All the information that I needed
... Read more
to make the repairs I obtained through your website. After looking at several websites to compare prices-etc, I found yours to be the best overall. Thanks-a-million your website is worth it's weight in Cold Food !
Read less
Was this helpful?
Thank you for voting!
evap.motor burned out
7 of 9 people
found this instruction helpful.
-
gerald from ardmore, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
common sense,removed plate,removed mounting bracked,unplugged,reversed order,and that was it.
Other Parts Used:
Was this helpful?
Thank you for voting!
refrigerator wasn't cooling but the freezer was working properly
6 of 6 people
found this instruction helpful.
-
Don from BELLVILLE, TX
- Very Easy
- 15 - 30 mins
-
Nutdriver
From instructions found on the site I was directed to the defrost timer part being bad. And from the information others posted that have had the same problem I was able to replace that part by removing the bottom grill just below the door and on the left side was the part. Removing one screw to remove the bracket from the frame and then
... Read more
another screw to remove the part from the bracket. I found it easier to remove the part from the bracket before I pulled the part out so I would have more room to unplug the connector. Just reverse the steps to replace the new part. It took about a day or so for the refrigerator to get to the proper temp.
Read less
Was this helpful?
Thank you for voting!
Bottom door hinge was lost during move
10 of 18 people
found this instruction helpful.
-
Dustin from Marlow, OK
- Really Easy
- Less than 15 mins
-
Screw drivers
I had lost the bottom hinge during a move and so I rigged the hinge using an old tv antenna and the door never really quite worked right and it was VERY annoying. I stumbled upon this site and was surprised how inexpensive the part I needed was. I was very impressed with the speed of shipping and the install took maybe 5 minutes. The f
... Read more
ridge works as good as new. Thanks a ton!
Read less
Was this helpful?
Thank you for voting!
Fan Motor was Noisy
6 of 7 people
found this instruction helpful.
-
albert from patterson, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench set
4 screws in the freezer and the back panel came off then 2 more screws to take the motor off. I unpluged the old motor pluged in the new motor put the back panel back on and I was done.
Other Parts Used:
Was this helpful?
Thank you for voting!
no shelf in my freezer
7 of 11 people
found this instruction helpful.
-
Barbara from Brookfield, IL
- Really Easy
- Less than 15 mins
first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!
Was this helpful?
Thank you for voting!
light not working
7 of 11 people
found this instruction helpful.
-
robert from FRANKLIN SQ, NY
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
I used pliers to pull lightly on the head of the switch, while I inserted a small flat head screw driver into the base of switch and gently worked around the edges to free it from the panel.
Was this helpful?
Thank you for voting!
Noisy evaporator fan motor
5 of 5 people
found this instruction helpful.
-
Greg from HADDON HGTS, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed old replaced with new part. Easy Peasy
Other Parts Used:
Was this helpful?
Thank you for voting!
NOISY
5 of 5 people
found this instruction helpful.
-
Paul from NANTUCKET, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
I FOLLOWED YOUR VIDEO............WAS EASY. THANKS
Other Parts Used:
Was this helpful?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
5 of 5 people
found this instruction helpful.
-
Gabriel from WASHINGTON, DC
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the vide
... Read more
o was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Noisy freezer fan
6 of 9 people
found this instruction helpful.
-
Robert from PITTSBURGH, PA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Other Parts Used:
Was this helpful?
Thank you for voting!
refrigerator evaporator fan noise
6 of 9 people
found this instruction helpful.
-
Alan from Sunapee, NH
- Easy
- 15 - 30 mins
-
Screw drivers
Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.
Was this helpful?
Thank you for voting!
A rat had chewed half of all four blades off
9 of 18 people
found this instruction helpful.
-
Curtis from Dothan, AL
- Really Easy
- Less than 15 mins
-
Nutdriver
First I removed the left condensor fan motor bracket nut, loosened the right motor bracket, dropped the moter bracket down freeing the motor from the rubber grommets.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Pulled the fan off from the motor shaft, pressed the new fan on the shaft and installed new grommets. Replaced the motor bracket and tightened the right bracket nut an ... Read more d checked fan for clearance and free spin. Reinstaled the left bracket nut. Turned on the refrigerator and checked fan for action. Everything worked great.
I did not know the fan replacement came with a compression ring already installed, so now I have an extra compression ring.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!