375- - Parts

This is an original replacement part sourced directly from the manufacturer. The key switch is commonly found in snowblowers from MTD and Yard Machines. This part includes a complete switch assembly made of metal and high-quality plastic, and two keys made of high-quality plastic. This part is used to trigger ignition in the machine. You will require a wrench when replacing this item.

This part is an OEM from MTD for use with Snowblowers. The most common reason for replacing the throttle spring is when it is damaged during another repair. This part is sold individually. Here is a list of tools that are needed to replace the throttle linkage spring needle nose pliers, 3/8 inch socket, 1/2 inch socket, 3/4 inch socket, 10 mm socket, Phillips-head screwdriver and a 5/16 inch wrench.

This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bol...Read moret may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.

An authentic item that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. This replacement gasket is generally utilized to provide an air-tight seal for the fuel bowl, over time the material may begin to wear out and crack eventually requiring a replacement. It is a high-quality component which is made of durable rubber and is sold individually.

This is an authentic OEM part from Yard Machines for use with Snow Blowers, Engine, Tillers, Lawn Mowers, Log Splitters, Chipper Shredders and Lawn Tractors. The carburetor float bowl gasket seals the gap between the carburetor body and the top of the carburetor float bowl. This part is sold individually. The tool needed to replace the c...Read morearburetor float bowl gasket is a wrench set. Let the engine cool and drain the gas tank before installing this part. Work in a well-ventilated area and wear work gloves to protect your hands.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with lawn and garden equipment. It provides an air-tight seal for the carburetor, over time the material may wear out and begin to crack eventually requiring a replacement. This part is made of high-quality composite material and is sold individually.