EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

375- - Overview

Models starting with 375-

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel Bowl O-Ring – Part Number: 951-11589A
$10.83
In Stock
Fuel Bowl O-Ring
Part #951-11589A
This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.
Key-ignition Switc – Part Number: 951-10630
$9.32
In Stock
Key-ignition Switc
★★★★★
★★★★★
(1)
Part #951-10630
This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approximately 1 inch wide and 2.25 inches long. You will need a replacement key if yours is broken or lost. Each key is sold individually.
Fuel Tank – Part Number: 951-10653B
$101.34
In Stock
Fuel Tank
Part #951-10653B
This fuel tank assembly is a genuine replacement part supplied straight from the manufacturer. It is commonly used in snowblowers. This tank is designed to contain the fuel needed to power the machine. It should be replaced if it is damaged or begins to leak. Before replacing this part, first be sure to empty the fuel tank.
Carburetor Gasket Plate – Part Number: 751P11897B
$6.40
In Stock
Carburetor Gasket Plate
Part #751P11897B
This genuine carburetor gasket plate is an original replacement part sourced directly from the manufacturer for use in snowblowers by MTD, Yard Machines, Troy-Bilt, Yard Man, and Cub Cadet. Positioned between the carburetor and the choke control bracket, this component is essential for creating a secure, airtight seal that ensures proper engine performance. Made from a thin, durable material, the gasket plate may require replacement if it becomes damaged or worn. This item is sold individually and may require a socket set and pliers for installation. For best results, consult your equipment’s service manual and perform the repair with the engine off and cool.
Bracket - Choke Co – Part Number: 951-11112
$36.50
In Stock
Bracket - Choke Co
Part #951-11112
A choke control bracket is designed to mount a choke lever/knob, allowing you to open or close the choke whenever necessary. This bracket is designed for use with snowblowers and is made of high-quality metal and features a built-in choke lever and connects to a push rod which actuates the choke on the carburetor. If you find that you have little-to-no control over the choke, or that the choke engages and/or disengages at random, this bracket may be damaged or worn and need to be replaced. To replace this bracket, you will need a screwdriver and wrench to access the inside of the carburetor housing, disconnect and replace the bracket, and reassemble the entire housing. This bracket is sold as an individual and is a genuine OEM part.
Snow Blower Choke Push Rod – Part Number: 951-10640
$16.00
In Stock
Snow Blower Choke Push Rod
Part #951-10640
This part is an OEM from MTD for use with Snow Blowers and Engines. The Choke push rod connects the choke thermostat lever to the carburetor choke plate lever to control airflow through the carburetor during engine start-up. The most common reason for replacing the choke link is if the engine will not run smoothly or will not start at all. This part is sold individually. The tools that you will need to replace the choke push rod is a 5/16 inch socket or nut driver.
Snow Blower Key Switch – Part Number: 951-10637
$20.39
In Stock
Snow Blower Key Switch
Part #951-10637
Snow Blower Fuel Drain Plug – Part Number: 710-04938
$6.55
In Stock
Snow Blower Fuel Drain Plug
Part #710-04938
Fuel Drain Bolt – Part Number: 710-04945
$6.55
In Stock
Fuel Drain Bolt
Part #710-04945
This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bolt may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.
Primer – Part Number: 951-10639B
$24.79
On Order
Primer
Part #951-10639B
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial role by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
Bolt - M6 X 12 Zin – Part Number: 710-04915
$6.84
Special Order
Bolt - M6 X 12 Zin
Part #710-04915
This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may also find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.
Kit-fuel Line – Part Number: 951-10650
$40.35
In Stock
Kit-fuel Line
Part #951-10650
This is an authentic MTD replacement part. The fuel line kit is designed by the manufacturer for use in snowblowers. This part includes the rubber tube and two metal clamps, and is used to carry fuel through the machine. You will require pliers when replacing these items.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Carburetor rebuild
3 of 6 people found this instruction helpful.
  • Jason from PEABODY, MA
  • Very Difficult
  • More than 2 hours
I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- [email protected]
Was this helpful?
Thank you for voting!