3704 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear flap had deteriorated.
3 of 4 people
found this instruction helpful.
-
David from PITTSBURGH, PA
- A Bit Difficult
- 30 - 60 mins
-
Pliers
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this helpful?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
3 of 19 people
found this instruction helpful.
-
Joel from ROSEVILLE, MN
- Very Easy
- Less than 15 mins
-
Socket set
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Was this helpful?
Thank you for voting!