EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3639527821 Kenmore Refrigerator - Instructions

All Instructions for the 3639527821
121 - 135 of 187

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old Icemaker Stopped Making Ice
  • Larry from Wildomar, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Instructions that came with the part were useless. I would have created new problems if I had attempted to follow the instructions. However, once I had the old part removed and put it beside the new part, required repair process was obvious, easy and quick. Frig now makes ice better than it ever did.
Was this helpful?
Thank you for voting!
Ice make stopped making ice
  • Carl from Broomfield, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Went to GE website and researched the problem for the model, determined that it was 90% sure it was the Ice maker, I ordered it and it arrived the next day, installed it and it began working immediately,
Was this helpful?
Thank you for voting!
No cube ice. We had crushed ice.
  • GENE from ASHEBORO, NC
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed ice select control unite from freezer by removing 3 nut screws holding unite in place. Disconnect 2 electrial plug ins.Remove unite from freezer and place on table for easy work space. Remove 4 nut screws holding Solenoid & Arm. Replace with new Solenoid & Arm. Reinstall back in freezer and now we have cube ice again.
Was this helpful?
Thank you for voting!
would not dispence ice
  • jimmy from saluda, SC
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
remove ice bucket and replace broken augar
Was this helpful?
Thank you for voting!
change of ice maker
  • Conti USA, Inc. from Fort Lauderdale, FL
  • Easy
  • 15 - 30 mins
  • Socket set
It was exactly as shown in your instruction video
Was this helpful?
Thank you for voting!
ice maker was leaking water. Cubes were sticking inside tray.
  • Carl from Abilene, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Reviewed video which was very helpful. Loosened two philips head screws, lifted up ice maker, unpluged power suppy and reinstalled. One of the easiest replacements ever!!
Was this helpful?
Thank you for voting!
Rust in ice
  • James from Corpus Christi, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Replaced auger and front helix kit.
Was this helpful?
Thank you for voting!
iCE MAKER LEAKING WATER
  • Roy H from Leesburg, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Followed the video demo and would have been done sooner but for limited work space- narrow freezer compartment and the release tabs on the electrical plug. First home repair that the air was not blue and got done in under time allocated.
Was this helpful?
Thank you for voting!
Ice maker- wouldn't release cubes only crushed ice.
  • David from Joliet, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Really easy- turned off ice maker, powered down appliance briefly. Removed ice maker by removing 3 screws with 1/4 nut driver. Unplugged ice maker from power supply. Removed and replaced solenoid arm assembly. Reversed steps and whammy - ice cubes dropped.
Was this helpful?
Thank you for voting!
Ice Maker stopped working
  • William from San Tan Valley, AZ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Took out one hex screw, disconnect electric couplings, pulled original ice maker out and found that the water supply line to the ice maker was frozen solid as well as the shute cup. Used hair dryer to thaw out the line and the cup reinstaled old ice maker and it worked fine. Did not have to use the new part at all at this time. Am keeping new part for future use.
Was this helpful?
Thank you for voting!
Ice Maker not making ice
  • George from Katy, TX
  • Easy
  • Less than 15 mins
  • Nutdriver
The video on the GE site was great. Showed step by step instructions on how to remove the old ice maker and install the new one. Also helpful was the detail on the water chute which needed to be moved from the old ice make to the new one. Saved hundreds of dollars by not having to have a repairman do this work for me.
Was this helpful?
Thank you for voting!
Icemaker does not make ice
  • Luis from Brownsville, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I'm a housewife in her late 40's. Before ordering the part, I watched your video on how to remove and install the new icemaker. First I unplugged the refrigerator. After a few minutes, I unplugged the icemaker and unscrewed it. I lifted it a bit and removed it. I did not use the icecup that comes with the part. Instead I removed the o ne from the old part and inserted it to the new one. Then I plugged in the new icemaker, placed it inside so as to match the holes and screwed it in. YES, it was that simple. It took me less than 10 minutes to do this. I saved myself over $100!!
Was this helpful?
Thank you for voting!
my ice maker quit working
  • Verma Jean from Lincoln, CA
  • Easy
  • Less than 15 mins
  • Socket set
I watched the video from the link that was sent to me with the shipping notice. It was very easy to understand. I had no trouble at all. I'm 75 years old woman, however, and I can fix about anything. Don't be afraid to fix appliances yourself if you feel you have the knowledge.
Was this helpful?
Thank you for voting!
Broken light cover
  • Benjamin from Plano, TX
  • Really Easy
  • Less than 15 mins
Removed broken light cover (that was held together with tape) and replaced with new part. The most amazing thing was that I was able to locate the part for a 21 year old refrigerator
Was this helpful?
Thank you for voting!
Ice maker leaking
  • Don from Horseshoe Bay, TX
  • Easy
  • Less than 15 mins
  • Screw drivers
Quite easy. Turn off water supply and turn off ice maker at switch inside freezer. Unscrew the old unit, separate the electrical connection, and pull it out. New unit comes with parts that do not fit my refrigerator, so visually examine the new and old units, reuse any needed parts from the old unit, such as plastic water ramp. Reconn ect the electrical connector, and screw it back in. Turn water supply back on and then turn ice maker back on at switch inside freezer. Discard unused parts. Wait up to 24 hours for new ice cubes to be made.
Was this helpful?
Thank you for voting!
All Instructions for the 3639527821
121 - 135 of 187