EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3639527821 Kenmore Refrigerator - Instructions

All Instructions for the 3639527821
106 - 120 of 187

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Ice
0 of 2 people found this instruction helpful.
  • Joseph from Sayville, NY
  • Easy
  • Less than 15 mins
  • Nutdriver
REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.
Was this helpful?
Thank you for voting!
Ice maker wasn't working
1 of 5 people found this instruction helpful.
  • Sherry from Heber Springs, AR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.
Was this helpful?
Thank you for voting!
Stopped making ice
0 of 2 people found this instruction helpful.
  • Todd from New Albany, IN
  • Easy
  • 15 - 30 mins
  • Socket set
The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.
Was this helpful?
Thank you for voting!
Ice Maker quit working
0 of 2 people found this instruction helpful.
  • Barbara from Woodston, KS
  • Easy
  • Less than 15 mins
  • Nutdriver
The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.
Was this helpful?
Thank you for voting!
Broken ice bucket
0 of 3 people found this instruction helpful.
  • john from milford, CT
  • Easy
  • 15 - 30 mins
  • Screw drivers
Very easy to repair-Went online-Found diagrahm-Ordered part-and presto it was fixed.
Very good schematic to go by. If you can read you most likely can fix it.
Was this helpful?
Thank you for voting!
The auger was rusted with age and made the ice taste bad.
0 of 4 people found this instruction helpful.
  • Robert from Azle, TX
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
The disassembly and reassembly was straightforward but the parts diagram was very helpful to help you get it back together. Make sure you get the convexity of the clip that retains the clear plastic barrel to the auger pointing in the right direction. The metal plate that that comes out with the assembly seems to rust as fast as the au ger, so you should just order that when you order the auger. I did not replace the plate so I cleaned it and painted it with epoxy paint before I reassembled.
Was this helpful?
Thank you for voting!
does not fill ice maker this was not original problem
2 of 10 people found this instruction helpful.
  • Salvatore from New City, NY
  • Very Difficult
  • More than 2 hours
  • Screw drivers
install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty
Was this helpful?
Thank you for voting!
Ice maker not working
  • Derek from Baton Rouge, LA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Went well. Changed the Ice Maker and then the Water Valve. All good and it is making ice.
Was this helpful?
Thank you for voting!
Plastic part of icemaker broke
  • Robert from Glen Ellyn, IL
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I watched the video and then read the instructions. Emptied and cleaned freezer compartment. Removed old unit and removed part of old unit to be used in new installation. I then installed the new unit and turned the water back on. I let the unit produce over night and through the first batch of ice away. Because of the various regrig erators this ice maker was used I had a little confusion recognizing our model, but worked through this problem useing some common sense. All around I'm very satisfied with the results.
Was this helpful?
Thank you for voting!
Ice maker not making ice and leaking
  • Andy from Ft Pierce, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers
I took off the front cover of the icemaker assembly and found that the gears were not meshing properly and therefore slipping. I removed the front panel and found that the white plastic cam unit under the large gear wheel had disengaged from the hole in the front plate which is why the gears were slipping. I refitted the cam and wheel a nd it worked fine but stopped again for the same reason the next day. As the plate appeared to be buckled somehow (not user repairable) and, as the unit was leaking and pooling water (which froze) in the collection unit, I decided to change the whole icemaker.

Ordered about 1300 on a Thursday, it arrived the next day at noon and was fitted straight away. As others have mentioned, the extension cable required to fit into my old fridge made it quite cumbersome however with a bit of juggling and persuasion, I got it to fit into the cut out corner of the ice container so it is completely out of the way. Job done in about 35 minutes, making ice in an hour.
Was this helpful?
Thank you for voting!
Broken ice maker replacement
  • Matthew J from White Plains, NY
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable), Wrench set
Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.
Was this helpful?
Thank you for voting!
Icemaker leaking water
  • Allen from Santa Fe, NM
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just ba rely. But I'm back in the ice again, no dripping water, all is good.
Was this helpful?
Thank you for voting!
Rusty Auger
  • James R. from San Clemente, CA
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
The parts recommended were exactly what I needed. The comment section on not paying attention during the removal were very helpful. I took a picture before totally taking everything apart. Thanks for the added comment.
Was this helpful?
Thank you for voting!
Ice maker was leaking
  • Robert from Pampa, TX
  • Easy
  • 15 - 30 mins
  • Nutdriver
Watched the video that showed how to disassemble the ice maker. Then went right in and replaced the part and turned it on. It immediately started filling up the ice tray. I still have not been able to find out why it does not make as fast as the original ice maker. The tempeature for the freezer is set pretty cold.
Was this helpful?
Thank you for voting!
Ice maker made no ice and no water from dispenser.
  • Lani from Lakeside, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
After what I thought was a thorough troubleshooting of said problem I replaced the Water Valve Assy which was really easy as the video shared, but it did not fix my problem. I had forgotten to pull the water line apart at the coupling below the doors (this was a troubleshooting step in another area). The water not dispensing was due to the line being frozen! Putting all items in a cooler with a couple blocks of ice and leaving the freezer door open for the length of watching a movie, the water was flowing again. Still no ice though. Ice maker vs mother board at the rear of the fridge, Hmmmm. Went with the ice maker, watched video, ole Steve makes the plugs disconnecting look easy, I had to use a flat head screwdriver to open the clips (he doesn't mention that) and I had 4 screws where he had 3. Also he didn't mention about the instructions which gives you 3 options with your unit. I had to re-use my Plastic Stripper Plate along with the Fill Cup and Ice Maker Insert. After completion of installation and about a half hour later, I heard ice fall, Wooohoooo!!! Overall the experience will make me think to utilize PartSelect again when needed. Reasonable prices and decent shipping time. Now the freezer light is out...
Was this helpful?
Thank you for voting!
All Instructions for the 3639527821
106 - 120 of 187