EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3563 Magic Chef Range - Instructions

All Instructions for the 3563
121 - 135 of 421

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element burned in half
1 person found this instruction helpful.
  • James from Allyn, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took two screws out unplugged the element and plugged the new one in and replaced the screws and turned the breaker back on. Works great...Piece of cake..jk
Was this helpful?
Thank you for voting!
The oven heating element burned out like a lit fuse!
1 person found this instruction helpful.
  • Herbert from Neenah, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!
Was this helpful?
Thank you for voting!
Element burned out.
2 of 4 people found this instruction helpful.
  • Raymond from Ottawa, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out aobut 3 inches and disconnected the wires.
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person found this instruction helpful.
  • Hudson from Cockeysville, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
bakeing element caught fire.
1 person found this instruction helpful.
  • Leticia from Sunnyvale, CA
  • Really Easy
  • Less than 15 mins
First I turned off power to the range at the fuse box (very important-The last time I didn't do this and ended up paying a repairman $150.00 to replace the damaged connectors). I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the new ele ment, pushed the element back in and replaced the screws. Turned the power back on and tested the element. The whole job took about 30 minutes because I had trouble disconnecting the old element. I used the flat end of the scrapper to push against the connector while I pulled the element out. Normally it would take only about 15 minutes.
Was this helpful?
Thank you for voting!
element had cracked
1 person found this instruction helpful.
  • TONI from SALISBURY, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I cut the power to the stove. Then I unscrewed the two screws. Pulled the element out a few inches. I had to use pliers to disconnect it from its wires. It was a very tight fit. Then I reconnected the new element. Cut the power back and and fired her up. Boy did she burn like fire.
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person found this instruction helpful.
  • Carolyn S from white oak, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
Previous element burnt up
1 person found this instruction helpful.
  • Betsy from Sun City, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I let my husband to the work...But it was very easy. I could have done it! He removed the screws, pulled the wires off previous element. Reattached the wires to the new element and screwed the ends back in place.
Was this helpful?
Thank you for voting!
Bake Element shorted out
1 person found this instruction helpful.
  • Laurie from Clarence, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I first shut off the breaker to the stove - safety first!

I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
Was this helpful?
Thank you for voting!
fireworks in the oven. Burned completely in two.
1 person found this instruction helpful.
  • Shelly from Allentown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connect ed the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!
Was this helpful?
Thank you for voting!
Bake element had burnt in half.
1 person found this instruction helpful.
  • Joyce from ROCHESTER, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched the video that was available and followed the instructions. Unplugged the stove first,removed the old element, and put the new one in. Video was very helpful and the installation was very easy. Was done in about 10 minutes.
Was this helpful?
Thank you for voting!
Wife said stove was on fire - Oven element shorted.
1 person found this instruction helpful.
  • James from Hoyt Lakes, MN
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed the old element by removing 2 screws and disconnecting two solderless connectors. One solderless connector was melted in two. I had to remove the rear panel and cut the old connector off and crimped on a new solderless connector. The time required was lengthened due to trip to the hardware store to get a new connector. While I was fixing the oven element my wife replaced the oven light.
Was this helpful?
Thank you for voting!
The bake element burst.
1 person found this instruction helpful.
  • Diane from Littleton, CO
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed the two screws that held the element in place and then pulled off the element from the connectors. Slipped the new connectors on. Tested the oven - Baked some blackberry cobbler!
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person found this instruction helpful.
  • Tom from ROCKTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
Element in oven would not adjust to the oven temperature.
1 person found this instruction helpful.
  • Dolores from Edmond, OK
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I ordered the temperature sensor after watching the video and seeing how easily it could be changed out. Unfortunately, they don't tell you that it may be necessary to access the part from the back. When I tried removing the sensor from inside the oven the connection separated before getting to the hole. I tried for 4 days to try to fi sh out the other end. Finally, I had my brother help me remove the oven from the wall and take the back off at which time we were able to connect the new sensory. It turns out that the wiring is on the upper right hand corner of the oven and the sensor is on the upper left hand corner and the wiring is rather short. I am a 64 year old female and do the majority of repairs around the house myself, but due to the weight of removing the oven I enlisted the help of my brother. After removing from the wall the rest was a breeze. Just wish the videos or written info on the website was a little more clear as to the different ways of accessing the damaged part.
Was this helpful?
Thank you for voting!
All Instructions for the 3563
121 - 135 of 421