EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3512W Magic Chef Range - Instructions

All Instructions for the 3512W
106 - 120 of 393

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element didn't heat at all
1 person found this instruction helpful.
  • Roger from PATERSON, NJ
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed 2 screws, disconnected wires, attached wires to new element, put screws back. Turned oven on. Perfect.
Was this helpful?
Thank you for voting!
One of the broiler drawer guides broke
1 person found this instruction helpful.
  • Jeri from NEW RICHMOND, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers
All I had to do was pull the drawer out and screw on the new part! Awesome experience...and it was so easy to find the part on the website, everything is very clear and with pictures to ensure where the part belongs...who could ask for more?
Was this helpful?
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
1 person found this instruction helpful.
  • Mz from COLUMBIA, ME
  • Very Easy
  • Less than 15 mins
  • Pliers
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person found this instruction helpful.
  • RICHARD from SHOW LOW, AZ
  • Very Easy
  • Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
The Baking Element won't heat to bake.
1 person found this instruction helpful.
  • Kiara from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I had the problem before and had to call in a Tech to repair the baking element in my oven. It cost me $150.00 for the repair. This time I decided to do the repair myself, so I went online and found this site The instruction video made it very easy. I am very proud of what I was able to do without calling a Tech. My oven works like new, I t only cost less than $40.00 for the total repair. I am so glad this site were there when I needed them.. Thanks a Lot..
Was this helpful?
Thank you for voting!
Couldn't find correct drip bowls that fit.
2 of 4 people found this instruction helpful.
  • Lowell from Hardin, KY
  • Really Easy
  • Less than 15 mins
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
Was this helpful?
Thank you for voting!
The old drip bowls were rusting, no chrome left
3 of 7 people found this instruction helpful.
  • kathryn from piqua, OH
  • Really Easy
  • Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person found this instruction helpful.
  • Carolyn S from white oak, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
My oven door seal had dried rotted
1 person found this instruction helpful.
  • Anita from ELKTON, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Donald from Tomahawk, WI
  • Really Easy
  • 15 - 30 mins
Very simple fix--unpugged two fittings in the back of oven plugged in the new element and it was done.The Best part was that the element burned out on a Sunday and I ordered the part that day and it shipped on Monday and received part on Wed AM.This is the second time I've had to replace the element and by ordering through Part Select I s aved $24.00 versus buying it from an appliance store.

Don Samuelson
Was this helpful?
Thank you for voting!
Lower element out-oven wouldn't heat
1 person found this instruction helpful.
  • PATSY from HALLWOOD, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the two screws at the rear of the oven and pulled out the existing element, plugged in the new element, pushing it back in place and mounted the screws back in the bracket. I then made the "Tim the Tool Man" grunt noises feeling very proud that I am now officially a Handy Woman!
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 person found this instruction helpful.
  • Jonathan from Havertown, PA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Easiest repair ever.

#1 - Turn off power (or you will get electricutued).
#2 - Unscrew back of heating elements
#3 - Disconnect wires (may need pliers)
#4 - Attach new heating element
#5 - Put in screws

Everything took 15 mintes max.
Was this helpful?
Thank you for voting!
bake element disintegrated!
1 person found this instruction helpful.
  • Susan from Grand Ledge, MI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Seems every 5 years this bake element totally disintegrates, so we,re experienced! Pull the stove out and remove the back, remove the 2 screws that hold the element(now in 5 pieces), diconnect and discard. Place new element in and connect, replace the 2 screws holding the element in place. Replace stove back. Easy
Was this helpful?
Thank you for voting!
oven didn't heat up
1 person found this instruction helpful.
  • robert from merrimack, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed the old element by taking out two screws then removed the two wires. pulled out the old element , put the new one in . connected the wires and screwed it in. Done.
Was this helpful?
Thank you for voting!
No Bake, only Broil
1 person found this instruction helpful.
  • Edward from Adamstown, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
POWER OFF! Unplugged oven from wall.

(Note: I found it easier to disconnect the wires from the element by removing the rear cover. Fumbling around inside the oven was getting me nowhere.)

Removed rear cover.
Disconnected old element.
Unscrewed the old element from inside the oven, removed, and installed t he new element. Screwed the new element in place.
Reconnected wires in back, installed the back cover.
Connected power.
Tested. Good as new.
Was this helpful?
Thank you for voting!
All Instructions for the 3512W
106 - 120 of 393