3167911 Craftsman - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel line broke
13 of 16 people
found this instruction helpful.
-
Erik from ROBERTSDALE, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this helpful?
Thank you for voting!
Air Filter needed to be changed
5 of 8 people
found this instruction helpful.
-
Arthur from LAVONIA, GA
- Really Easy
- Less than 15 mins
Air filter has a tab to open cover just press the tab to remove take old filter out and replace it with new one then reinstall the cover and you're done.
Was this helpful?
Thank you for voting!
The gear ssembley was not turning
4 of 6 people
found this instruction helpful.
-
Ronald from TOOL, TX
- Really Easy
- 30 - 60 mins
-
Screw drivers
I ordered the gear assembley and the boom assembley and I stalled them.
Other Parts Used:
Was this helpful?
Thank you for voting!
Carburetor and Fuel Tank needed replacement
2 of 2 people
found this instruction helpful.
-
Sal from CONROE, TX
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed and replaced both.
Y'all need to include the gasket with the replacement Carburetor before sending out to customers.
Y'all need to include the gasket with the replacement Carburetor before sending out to customers.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace Starter Housing with broken pull cord.
2 of 2 people
found this instruction helpful.
-
Timothy from GAINESBORO, TN
- Really Easy
- 30 - 60 mins
-
Wrench (Adjustable)
1. Remove Shaft & clutch cover by removing 3 torx screws and loosening cinch bolt.
2. Remove clutch assembly with torx tool in center and then by cinching the shaft and turning spring assembly counter clockwise with an adjustable wrench.
3. Remove starter housing by removing 3 Torx bolts from the front and a screw ... Read more from the back.
4 Reverse the process.
2. Remove clutch assembly with torx tool in center and then by cinching the shaft and turning spring assembly counter clockwise with an adjustable wrench.
3. Remove starter housing by removing 3 Torx bolts from the front and a screw ... Read more from the back.
4 Reverse the process.
Read less
Was this helpful?
Thank you for voting!
Super Easy Install
3 of 7 people
found this instruction helpful.
-
Michael from GLENN HEIGHTS, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Was this helpful?
Thank you for voting!
Lost the retainer for my brush cutter on my Troy-bilt brush cutter
1 person
found this instruction helpful.
-
Steven from LOUISVILLE, KY
- Very Easy
- Less than 15 mins
-
Socket set
Parts fit perfectly. Removed the string trimmer and installed the brush blade. Tightened with an 11mm socket and went to work.
Was this helpful?
Thank you for voting!
Broken Air Cleaner Door
1 person
found this instruction helpful.
-
Kenneth from OAKDALE, TN
- Very Easy
- Less than 15 mins
-
Screw drivers
Took two screws out replaced cleaner assembly put the two new screws that came with it in. Replaced filter put put filter cover on. Took less than 15 minutes and that includes finding my star screwdrivers
Was this helpful?
Thank you for voting!