This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines ...Read moreare clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear.
The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages.
If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor.
This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning.
A troubleshooting tip is to tap t...Read morehe part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor.
This part is sold individually, and you wil...Read morel know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks.
Most customers rated this repair as easy.
The pawl assembly is a complete OEM kit that includes the two plastic pawls, the two springs, and the metal housing. Installation is rated "Medium" difficulty and requires a screwdriver and socket set. This part houses the pawls that will grap onto the flywheel when the rope is pulled to start the engine. This part attaches inside the rec...Read moreoil housing. If broken, You will not be able to start the engine. The rope will be loose. Inspect for damage, and replace if broken.
Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly ...Read morefor any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or d...Read moreirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.
This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel line broke
13 of 16 peoplefound this instruction helpful.
Erik from ROBERTSDALE, AL
Really Easy
15 - 30 mins
Screw drivers
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this helpful?
Thank you for voting!
Air Filter needed to be changed
5 of 8 peoplefound this instruction helpful.
Arthur from LAVONIA, GA
Really Easy
Less than 15 mins
Air filter has a tab to open cover just press the tab to remove take old filter out and replace it with new one then reinstall the cover and you're done.
Was this helpful?
Thank you for voting!
The gear ssembley was not turning
4 of 6 peoplefound this instruction helpful.
Ronald from TOOL, TX
Really Easy
30 - 60 mins
Screw drivers
I ordered the gear assembley and the boom assembley and I stalled them.