EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3137 - Instructions

All Instructions for the 3137
46 - 60 of 83

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
socket had melted
1 of 3 people found this instruction helpful.
  • Chris from Charlotte, NC
  • Really Easy
  • Less than 15 mins
pluged the wire harness into the new socket from the back and snaped the socket in place.
Was this helpful?
Thank you for voting!
door shelf retainer broke off
0 of 1 people found this instruction helpful.
  • Sheryl from Wyoming, MI
  • Really Easy
  • Less than 15 mins
First, I removed the broken end cap from refrigerator door. Then I snapped the new end cap into place. Repair took less than 5 minutes and required NO TOOLS! Easy!! Got my part in one day, Thanks.
Was this helpful?
Thank you for voting!
The retainer latch broke
0 of 1 people found this instruction helpful.
  • Gary from Clayton, NY
  • Really Easy
  • Less than 15 mins
Removed the shelf retainer and snapped the new one in. and reinstalled the shelf on the door.
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
Was this helpful?
Thank you for voting!
The end cap on the door shelf snapped off.
0 of 1 people found this instruction helpful.
  • Miranda from Waterford, CT
  • Really Easy
  • Less than 15 mins
I pulled off the broken piece, ordered the new piece, and snapped it on. VERY SIMPLE.
Was this helpful?
Thank you for voting!
Light socket missing in refrigerator
1 of 4 people found this instruction helpful.
  • Wayne from Issaquah, WA
  • Really Easy
  • Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
Broken shelf support on the refrigator door
0 of 2 people found this instruction helpful.
  • Matthew from Philaelphia, PA
  • Really Easy
  • Less than 15 mins
I matched the part I needed throught your web site. Then I called and spoke to a customer support person, and gave my personal information to her. I do not like giving my credit card numbers over the internet. Your site allows me to do that.
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people found this instruction helpful.
  • Roscoe G from ROCHESTER, NY
  • Very Easy
  • Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
fan and compressor wont start
  • JOSE from NEW YORK, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Googled the model number of refrigerator with symptoms of "refrigerator wont run". Parts select web site appeared on my screen, opened Parts Select website, Partselect said probable cause of my frige symptom was that the run capacitor usually burns out 51% of the time. They were correct with the diagnosis 100%. I ordered the run capacito r for $23.00, installed it in 10 minutes, refrigerator runs good as new. Thank you for saving me cost of service call. I probably saved $200 or more. I will use Partselect again with my next problem. THANK YOU,
Was this helpful?
Thank you for voting!
Reistall shelf
  • Oleg from Lees Summit, MO
  • Really Easy
  • Less than 15 mins
Replaced cap and reinstalled. But I used iron nail inside cover to hold right side because crack was at right hole and right part would not help.
Was this helpful?
Thank you for voting!
needed new light socket
  • Charles from Williamsburg, VA
  • Really Easy
  • Less than 15 mins
Pulled out old socket.pushed in new one.
Was this helpful?
Thank you for voting!
compressor running and hot, refer and fridge room temp.
  • Charles from Durham, CA
  • Really Easy
  • Less than 15 mins
Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked.
Was this helpful?
Thank you for voting!
door shelf end cap broke off
  • Leonard from Niagara Falls, NY
  • Really Easy
  • Less than 15 mins
easily popped the new one in.
Was this helpful?
Thank you for voting!
Smelled electrical/plastic burning. Pulled out refrigerator and noticed small flame near compressor.
  • MARTIN from RIVER FALLS, WI
  • Easy
  • Less than 15 mins
Unplugged refrigerator. Removed relay by unclipping wire and pulling relay off compressor. Looked-up part number and ordered part. Replaced part and plugged in refrigerator.
Was this helpful?
Thank you for voting!
Both the fridge aqnd freezer would not get cold.
  • Mary from Farmingdale, NY
  • Easy
  • Less than 15 mins
  • Screw drivers
Easy. Followed the video instrucations. the part was right there next to the compressor.
Was this helpful?
Thank you for voting!
Refrigerator and freezer too warm
  • Paul from Andrews, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
1) This is a built-in refrigerator with the compressor, coils, etc. at the top. Turn off the breaker to the fridge. 2) Remove the front panel off the top (just push up and pull out). 3) Removed 2 screws to the old timer and carefully remove the plug. Plug the new timer in and screw in. 4) Since our fridge was heavily frosted up, we moved everything to another refrigerator and coolers and kept the refrigerator off until all panels were room temperature. 5) If you haven't cleaned the coil in a while, vacuum it with a soft brush attachment. 6) Turned back on and the refrigerator is cooler than ever!
Was this helpful?
Thank you for voting!
All Instructions for the 3137
46 - 60 of 83