30000 - Overview

Genuine Coleman replacement part, it is sold individually. This part keeps the lantern pressurized. Includes: Plunger, spring clip, metal cap, spring, and clip. Installation is fairly easy, requiring needle-nose pliers, oil, and a flat-head screwdriver, or similar tool, to pry to the spring clip off of the pump. Compatible with the Coleman lanterns shown below.

This is an authentic Coleman replacement part. Includes 1 white plastic cooler handle and 2 plastic hinge pins. Use a screwdriver or other tool to pop the hinge pins out, then simply snap the new pins back into place. This part is compatible with a number of various cooler models, listed below.

This is a genuine OEM sourced replacement part for Coleman lanterns or stoves. It acts as a spacer and a seal for the valve stem. This item is made out of graphite and it is sold individually. Please note it does not include valve stem or a wheel.

This genuine manufacturer-sourced check valve assembly is designed for use with select Coleman lanterns and stoves. Made of durable brass, the assembly includes both the check valve and the air stem. The air stem threads into the check valve and is operated using the hollow pump shaft. When turned counter-clockwise, it opens the valve to ...Read moreallow air to pass through, regulated by the internal check ball. When turned fully clockwise, it securely closes the valve. This OEM part is sold as a complete unit and is essential for maintaining proper pressure control in compatible Coleman fuel systems.

Genuine Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. This part is made out of Clear Glass, and it is sold individually. The spare lantern globe can be installed safely and easily with no additional tools.

Carry Case

Genuine Coleman replacement part, This pack contains four Mantles. The Mantle is the part of the Lanterns shown below, that generates bright white light when heated by flame. The Mantle is made of woven fabric with other material as part of them. Once a Mantle is prepared for use, it becomes very brittle. For this reason it is advised to keep some extra Mantles on hand at all times.

This is an authentic Coleman replacement part, sold individually. The long portion of this part is pressed into the drain hole from inside the cooler, it is then threaded from the outside to secure it in place. The plug is also threaded on to the nut. The cap will then be inserted into the drain. It is used with the coolers listed below.

This is one pack of two genuine Coleman replacement parts designed for use with their 2-Burner Camping Stoves. These small pieces are wire clips are designed to hold the wind baffles in place. To install, simply wing the wind baffles out and insert the open ends of the wire clips into the slots in the ends of the stove.

This is a genuine replacement kit sourced directly from Coleman. It is a 10-piece assembly that includes the separating Burner Rings (Part Number: 400-345), one Burner Bowl (Part Number: 413C3061), and one attachment Screw (Part Number: 1022B1612). One kit is used per burner.

This is a genuine OEM sourced replacement part designed for use with Coleman gas lanterns. Portable camping lanterns light output comes from the mantle, not the flame itself. The mantle generates bright, white light when heated by the flame. It is made out of fabric material and it includes two (2) mantles per package.

This is an authentic Coleman replacement part, sold individually. Includes the fan, 4 fan screws and 3 wire connectors. The fan removes the warm air from inside of the Thermoelectric Cooler to keep the inside of the cooler cold. The inside fan is not replaceable. This part is compatible with the Coleman coolers listed below. Pliers, phillips head screwdriver, wire cutters or scissors are needed for repair.