3000000791 Coleman Camping Equipment - Overview

Genuine Coleman replacement part, it is sold individually. This part keeps the lantern pressurized. Includes: Plunger, spring clip, metal cap, spring, and clip. Installation is fairly easy, requiring needle-nose pliers, oil, and a flat-head screwdriver, or similar tool, to pry to the spring clip off of the pump. Compatible with the Coleman lanterns shown below.

This is a genuine OEM sourced replacement part for Coleman lanterns or stoves. It acts as a spacer and a seal for the valve stem. This item is made out of graphite and it is sold individually. Please note it does not include valve stem or a wheel.

This genuine manufacturer-sourced check valve assembly is designed for use with select Coleman lanterns and stoves. Made of durable brass, the assembly includes both the check valve and the air stem. The air stem threads into the check valve and is operated using the hollow pump shaft. When turned counter-clockwise, it opens the valve to ...Read moreallow air to pass through, regulated by the internal check ball. When turned fully clockwise, it securely closes the valve. This OEM part is sold as a complete unit and is essential for maintaining proper pressure control in compatible Coleman fuel systems.

This is one pack of two genuine Coleman replacement parts designed for use with their 2-Burner Camping Stoves. These small pieces are wire clips are designed to hold the wind baffles in place. To install, simply wing the wind baffles out and insert the open ends of the wire clips into the slots in the ends of the stove.

This is a genuine replacement kit sourced directly from Coleman. It is a 10-piece assembly that includes the separating Burner Rings (Part Number: 400-345), one Burner Bowl (Part Number: 413C3061), and one attachment Screw (Part Number: 1022B1612). One kit is used per burner.

This authentic Coleman replacement kit is used with stoves. This kit includes a burner cap, a burner bowl, 3 rings, 2 fillers, and a screw. This part is attached onto the manifold in order to hold the flame.

Neoprene Pump Cup

This genuine Coleman replacement part is designed for use with liquid fuel lanterns and is installed inside the generator pump. The assembly includes a neoprene rubber pump cup and a metal pump clip (also known as a pump nut). The pump cup forms a seal within the pump to prevent air leakage and maintain pressure, while the pump clip secur...Read morees the cup in place on the plunger shaft, positioned closer to the interior of the lantern. Before installation, the pump cup should be coated with Pump Lube (part #200K2251) to ensure proper function. This replacement set includes one pump cup and one pump clip.

This is a manufacturer-sourced replacement part designed for fuel tanks used with Coleman heaters and lanterns. This filler cap covers a valve opening on the tank that is found as part # 424-5601. This metal part is sold individually.

This is a genuine Coleman replacement part used with lantern pumps. It is a small metal piece that is designed to hold the pump in place on the fuel tank. To install, slide the pump into place and align the two small holes on the pump with the holes in the tank; fit the clips through the holes to lock everything into place. This part is sold individually, and is usually included with the plunger assembly.