3000000792 Coleman Camping Equipment - Overview

This genuine manufacturer-sourced check valve assembly is designed for use with select Coleman lanterns and stoves. Made of durable brass, the assembly includes both the check valve and the air stem. The air stem threads into the check valve and is operated using the hollow pump shaft. When turned counter-clockwise, it opens the valve to ...Read moreallow air to pass through, regulated by the internal check ball. When turned fully clockwise, it securely closes the valve. This OEM part is sold as a complete unit and is essential for maintaining proper pressure control in compatible Coleman fuel systems.

Carry Case

This is a genuine replacement kit sourced directly from Coleman. It is a 10-piece assembly that includes the separating Burner Rings (Part Number: 400-345), one Burner Bowl (Part Number: 413C3061), and one attachment Screw (Part Number: 1022B1612). One kit is used per burner.

This is a genuine OEM replacement part used with Coleman gas lanterns. This part is made for newer lanterns with a plastic pump cap, but it does include the parts to convert it to an older-style metal pump cap. This kit includes the parts for one repair. A pair of needle nose pliers and some lubrication oil will be needed for this fix.

Neoprene Pump Cup

This is a manufacturer-sourced replacement part designed for fuel tanks used with Coleman heaters and lanterns. This filler cap covers a valve opening on the tank that is found as part # 424-5601. This metal part is sold individually.

This genuine Coleman-made lubricant is used on the pump in the gas lanterns. This part assists in creating an air tight seal inside of the pump. Inside the pump is a leather or neoprene pump cup; the pump cup needs to be coated in lubricant in order to seal it effectively. This lube is made of neatsfoot oil, a thin animal oil primarily used to condition and soften leather. This part is sold individually.

This is a genuine Coleman replacement part used with lantern pumps. It is a small metal piece that is designed to hold the pump in place on the fuel tank. To install, slide the pump into place and align the two small holes on the pump with the holes in the tank; fit the clips through the holes to lock everything into place. This part is sold individually, and is usually included with the plunger assembly.

This is a genuine Coleman replacement part used on the 1-Burner Sportster II Dual Fuel Stove. This part sits between the fount (the fuel tank) and the Burner Rings (part # 425A3451). The fuel flows from the fount into the Burner Box; the flame is lit where the fuel escapes through vents around the Burner Box created by the corrugated Burner Rings.

This is a genuine Coleman part made specially for the Sportster II Dual Fuel portable stove. A generator is designed to atomize fuel. It is connected from the valve, which controls the flow of fuel from the tank into the generator. Note that this part is held into place beneath the grate with the Generator Bracket, sold separately as part # 400A1261. This generator is sold individually.