290A Coleman Lighting - Parts

This genuine Coleman-made lubricant is used on the pump in the gas lanterns. This part assists in creating an air tight seal inside of the pump. Inside the pump is a leather or neoprene pump cup; the pump cup needs to be coated in lubricant in order to seal it effectively. This lube is made of neatsfoot oil, a thin animal oil primarily used to condition and soften leather. This part is sold individually.

This is a genuine replacement O Ring sourced directly from Coleman. It is a part of the valve assembly, and fits onto the end of the feed tube that fits inside of the valve tube. An O ring is a flexible circular part that is used to seal between solid parts to maintain pressure. A compromised O ring can prevent proper functioning of machinery by allowing for leakage. This part is sold individually.

This is a genuine Coleman replacement part made for use with liquid-fueled lanterns. This is part of the Feed Tube Assembly (part # 288B5231), which itself is part of the Valve Assembly (part # 288A6571). This is part of the mechanism which controls the timing and quantity of fuel released into the generator, where is is then vaporized and sent into the burner. This part is sold individually.

This is an authentic Coleman part used with their portable lanterns. The eccentric is connected to the tip cleaner of the generator. It rotates off-center of the axis, allowing the tip cleaner to move in a back-and-forth motion and poke any obstructions from the orifice at the tip of the generator. This part is sold individually.

This is an authentic Coleman-made assembly used with lanterns. Included is one each of metal bail handle and ceramic-coated metal ventilator. The bail handle hooks into pre-drilled holes on the sides of the ventilator. Then the ventilator is set onto the screw on top of the burner assembly, and is held into place when the ball nut is twisted down onto the screw.

This is a genuine Coleman replacement part used with lanterns. This assembly includes the fount, which is also called a fuel tank. This assembly holds the liquid fuel while also acting as the mechanism that pressurizes it and sends it into the generator and burner. In Addition to the Fount Itself, This Assembly Includes the Following Par...Read morets: • Filler Cap, Part Number: 3000000454 • Pump Plunger, Part Number: 242J5201 • Check Valve & Air Stem, Part Number: 200-6381 • Fuel Tube Assembly, Part Number: 220D1461 • Stem Assembly, Part Number: 220C6531

This is an OEM replacement kit made for Coleman liquid-fueled lanterns. This is a set of two metal pieces that fit where the bail handle is attached to the ventilator. They are attached to the top of the collar and hold the glass globe.

This is a genuine Coleman replacement part used with lantern pumps. It is a small metal piece that is designed to hold the pump in place on the fuel tank. To install, slide the pump into place and align the two small holes on the pump with the holes in the tank; fit the clips through the holes to lock everything into place. This part is sold individually, and is usually included with the plunger assembly.