290A Coleman Lighting - Overview

Genuine Coleman replacement part, it is sold individually. This part keeps the lantern pressurized. Includes: Plunger, spring clip, metal cap, spring, and clip. Installation is fairly easy, requiring needle-nose pliers, oil, and a flat-head screwdriver, or similar tool, to pry to the spring clip off of the pump. Compatible with the Coleman lanterns shown below.

This is a genuine OEM sourced replacement part for Coleman lanterns or stoves. It acts as a spacer and a seal for the valve stem. This item is made out of graphite and it is sold individually. Please note it does not include valve stem or a wheel.

This genuine manufacturer-sourced check valve assembly is designed for use with select Coleman lanterns and stoves. Made of durable brass, the assembly includes both the check valve and the air stem. The air stem threads into the check valve and is operated using the hollow pump shaft. When turned counter-clockwise, it opens the valve to ...Read moreallow air to pass through, regulated by the internal check ball. When turned fully clockwise, it securely closes the valve. This OEM part is sold as a complete unit and is essential for maintaining proper pressure control in compatible Coleman fuel systems.

This is a Genuine Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. This part is made out of Clear Glass, and it is sold individually. The spare lantern globe can be installed safely and easily with no additional tools.

Genuine Coleman replacement part, This pack contains four Mantles. The Mantle is the part of the Lanterns shown below, that generates bright white light when heated by flame. The Mantle is made of woven fabric with other material as part of them. Once a Mantle is prepared for use, it becomes very brittle. For this reason it is advised to keep some extra Mantles on hand at all times.

This is a genuine OEM sourced replacement part designed for use with Coleman gas lanterns. Portable camping lanterns light output comes from the mantle, not the flame itself. The mantle generates bright, white light when heated by the flame. It is made out of fabric material and it includes two (2) mantles per package.

This is a genuine OEM replacement part used with Coleman gas lanterns. This part is made for newer lanterns with a plastic pump cap, but it does include the parts to convert it to an older-style metal pump cap. This kit includes the parts for one repair. A pair of needle nose pliers and some lubrication oil will be needed for this fix.

Neoprene Pump Cup

This is a genuine Coleman replacement part used with 2-Mantle Gas Lanterns. This part comes mostly pre-assembled but will require a screwdriver to attach the valve knob dial. This assembly regulates the flow of fuel from the fount (the fuel tank) to the generator; the dial controls the flow and the flame strength. The generator then vapor...Read moreizes the fuel and sends it into the burner. Note that the generator is not included and is sold separately as part #: 290-5891. This Assembly Includes the Following Parts: • Valve Knob, Part Number: 288C1501 • Pack Nut, Part Number: 242B6161 • Packing, Part Number: 242-6201 • Pack Nut, Part Number: 1202B1101 • Valve Stem, Part Number: 288A6141 • Eccentric Block A, Part Number: 288C3041 • Valve Block, Part Number: 288B3031 • Valve Core, Part Number: 288-3651 • O Ring, Part Number: 288-1261 • Feed Tube Ay, Part Number: 290-5231

This is a genuine Coleman replacement burner. This part is designed to hold two #21 size mantles around the two top tubes. The generator fits inside this part, through the center hole at the base. This piece acts as a standard burner does; the generator emits fuel into the burner, which then emits a flame at its other end. This part is sold individually.

This genuine Coleman replacement part is designed for use with liquid fuel lanterns and is installed inside the generator pump. The assembly includes a neoprene rubber pump cup and a metal pump clip (also known as a pump nut). The pump cup forms a seal within the pump to prevent air leakage and maintain pressure, while the pump clip secur...Read morees the cup in place on the plunger shaft, positioned closer to the interior of the lantern. Before installation, the pump cup should be coated with Pump Lube (part #200K2251) to ensure proper function. This replacement set includes one pump cup and one pump clip.

This is a manufacturer-sourced replacement part designed for fuel tanks used with Coleman heaters and lanterns. This filler cap covers a valve opening on the tank that is found as part # 424-5601. This metal part is sold individually.