2283 Black and Decker Hammer Drill - Parts

Included in part number 143843-00

The ring is made out of plastic and attaches to the field. It is available as an individual replacement part. This item is an OEM from DeWALT and Black & Decker for use in drills, polishers, and routers. A set of pliers and a screwdriver might be needed during the installation process. It may become broken and will need to be replaced.

This is a genuine replacement part for DeWalt and Black & Decker hammer drills. The brush spring is used to keep the pressure on the carbon brushes to ensure a constant contact with the armature. The brushes transfer the electrical energy from outside the motor into the spinning windings in the center of the motor. This item is made of durable metal. This part is sold individually.

This is an authentic manufacturer-sourced component which is specially made for use with DeWALT, Porter Cable and Black and Decker power tools. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location ...Read moreand application of this part. Keep in mind this high-quality ball is made of durable metal and is sold individually.

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most...Read more commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is an authentic replacement part, sourced from the original manufacturer for use with power tools. The o-ring is used with several different types of equipment and the application of the o-ring can vary based on the model of the machine. This item is available as an individual replacement part.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.

This replacement 10 foot power cord is specially produced for Black and Decker and Dewalt power tools. It is designed to connect to a standard US outlet supplying power to the tool. Please note one rubber insulated cord is included per order, the cord protector is not included it is sold separately. To complete this repair you will need a screwdriver.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with drills, demolition hammers, and holguns. The metal screw is used to secure the front handle to the body of the tool and can be used to adjust the position of the handle. This item is available as an individual replacement part.

The left hand screw is an original part from DeWalt. The metal screw is made for use with several drill devices, and is sold individually. The screw is designed to help connect the drill chuck. A hex key or Allen wrench is helpful for the installation.