2283 Black and Decker Hammer Drill - Overview

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the...Read more new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.

This M4.55 x 32 mm Plastite screw is made to form secure threads in plastic tool housings. It has a T20 Torx drive and is used in select handles, covers, and motor housings. Use the complete tool model and type number to guarantee the proper fit. Check the parts diagram for its exact location before installation. Unplug the tool or remove...Read more its battery before repair. Start the screw by hand and do not overtighten it, as too much force can strip or crack the plastic.

This is an authentic manufacturer sourced replacement part designed for use with drills. This chuck key tightens and loosens the jaws of the chuck. This item is made out of metal and it is sold individually.

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 18 Gauge • 10 Feet Long

This item is supplied directly from original equipment manufacturer. It is a very common accessory used with a variety of Black & Decker as well as Dewalt drills. This rubber holder helps user to secure chuck key for easy access. Includes one (1) chuck key holder per order. Please note, chuck key itself is sold separately.

This genuine cord protector, also known as a strain relief boot, is designed to safeguard the power cord where it enters your tool housing. Made from flexible, durable material, it helps prevent the cord from bending, twisting, or fraying during regular use, supporting safe and reliable performance. Small but essential, this component is ...Read morean effective replacement if the original protector is worn or damaged, helping extend the life of your tool and maintain proper cord alignment.

Genuine OEM replacement part, this item is sold individually. This screw is used in various places in all of the tools listed below The most common use for this screw is to secure plastic housings together. It has a Torx T-20 head.

Included in part number 143843-00

Included in part number 448671-03

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most...Read more commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is an authentic replacement part, sourced from the original manufacturer for use with power tools. The o-ring is used with several different types of equipment and the application of the o-ring can vary based on the model of the machine. This item is available as an individual replacement part.