20331 Toro Lawn Mower - Parts

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is a genuine manufacturer sourced replacement cap for the fuel tank. It is specially designed for use with Briggs and Stratton engines installed on lawn and garden equipment. It is used to keep the fuel in the fuel tank and protect it from outside contaminants. It features a retainer that will remain in the tank to keep the cap from falling out or getting lost. This plastic cap is sold individually.

This part has been OEM sourced to ensure a high level of quality. The durable plastic bag anchor is intended to be used with walk-behind lawnmowers from Toro. The bag anchor attaches to the back of the mower's deck assembly. This item is used to secure the grass collection bag and to support the bag's frame. A hex socket wrench or ratchet is needed to install this part and the anchor is sold individually.

This authentic manufacturer-sourced screw-taptite is made for use with Toro and Lawn-Boy lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this screw. It...Read more is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.

This is an authentic OEM part for use with Briggs and Stratton Lawn and Garden Equipment Engines. The intake manifold carries the fuel and air mixture from the carburetor to the engine cylinder. This part includes the gasket, screws, The tool that you will need to replace the intake manifold are a screwdriver, pliers and a wrench set.

Need to freshen up the seal on your refrigerator door? Our GE Fresh Food Door Gasket is exactly what you're looking for. In a sleek white design, this gasket is a crucial part of your fridge?it seals the gap around the door, stopping warm air sneaking in and ensuring your food stays fresh and cool. Installing this gasket is simple. To ma...Read moreke it even easier, you might want to soften it up first by soaking in warm water or gently heating with a hairdryer set to low. Just remember, during installation your fridge door will need to stay open, so plan accordingly to keep your food safe. Made to live up to the GE reputation for quality and reliability, this superior gasket helps put your appliance back into top-notch condition. Remember how new and effective your fridge was when you first bought it? This door gasket could help bring back that efficient performance. Have a GE refrigerator? This gasket could be just what you need to keep it running smoothly and efficiently. So why wait? Give your fridge a new lease of life with our GE Fresh Food Door Gasket. Your food (and your energy bills) will thank you!

The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a socket set and wrench set. It attaches to the blade assembly. If there are rattling sounds or other srange sounds coming from the blade area tha...Read moret is a sign the part has been broken or damaged due to wear or fatigue and should be replaced. Refer to your make model, and diagrams to ensure you choose the right part.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the control cable out of the way by securing it in the middle of the handle. This item is priced as a single part.