20089 (280000001-280999999 - 2008) Toro Lawn Mower - Parts

The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not turn you may need to replace the blade driver. A wrench will be needed to replace this part if it becomes damaged. The driver is available as an individual replacement item and is an original Toro part.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

This is an authentic OEM part. The Toro air vane is designed for use with many lawn mower engines. This plastic item pulls the choke open when the flywheel fan sends airflow from the air vane. You will need a wrench and a screwdriver for the installation. The air vane is sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn and garden equipment. It is an identical replacement for a missing or a faulty bushing-sleeve that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and ...Read moreapplication of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Lawn Boy and Toro lawn and garden equipment. This is a special hardware that helps to secure the bushing. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropria...Read morete diagrams of your model for the correct location and application of this retainer. Keep in mind this high-quality part is made of durable metal and is sold individually.

It is a genuine manufacturer-sourced item that is specially made for Toro and Lawn Boy lawn mowers. The drive control cable is the cable that stops the blade when the control handle is released. This part provides an identical replacement for a missing or a faulty bail-brake that was installed on a new unit. Please make sure to refer to t...Read morehe appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality bail-brake is made of durable metal and is sold individually.

This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from Toro and Lawn Boy. The handle locking knob is used with a bolt to secure the lower portion of the handle to the mower's deck assembly. This item is available as an individual replacement part.

This authentic replacement part is supplied by original equipment manufacturer for use on Toro walk behind lawn mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when the control handle is released on walk-behind mowers. If the cable is broken it will cause...Read more the brake to not release even when the lever is pressed. You may need pliers to complete this repair. • First you want to see where the old cable is attached to the motor assembly • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, just push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

This item is a genuine Toro replacement part that is OEM sourced to ensure quality. The plastic knob is intended to be used with walk-behind lawnmowers. This item attaches to the height adjustment lever and is used as a grip when changing the cutting height of the deck. The lever knob is priced individually and four may be needed.

This bag frame is a genuine OEM replacement part manufactured by Toro. It is compatible with many models of lawn mowers. This frame is designed to ensure that the grass bag retains its shape. This part is sold individually, and it requires no tools to replace. It should be replaced if it is bent or damaged. Please note the grass bag is sold separately as part 108-9792.