20076 Toro Lawn Mower - Parts

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is an original replacement part manufactured for use with small engines. This special fuel fitting is used to connect the fuel line to the carburetor. Overtime old fuel can clog passageways within the carburetor and may require the carburetor to be rebuilt. This fuel fitting is sold as an individual replacement part, please see model diagram for associative parts.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman and Tecumseh pressure washers, lawn mowers, and snow blowers. When pulled, the starter rope engages starter spring causing the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. Th...Read moreis part is made of nylon rope and is sold individually. To install the rope you will need a screwdriver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.

This is an authentic replacement part manufactured for use with snowthrowers and lawnmowers. The extension spring is commonly used to link the governor control arm to the control cable. This extension spring is sold individually, please see model diagram for associative parts.

This O-ring is designed for use with small engine carburetors and is made of rubber, meaning over time and further exposure to fuel, it will become brittle and crack. This O-ring is installed within the carburetor and is located between securing screws near the base. If disassembling your equipment to replace this O-ring, it is recommende...Read mored you inspect the other parts to ensure optimal performance and to prevent any leaks. Featuring an inner-diameter of approximately 0.25-inches, the replacement process for this O-ring in your engine will vary, so check the user manual for exact location of this part.

This authentic part is supplied by the original equipment manufacturer for Tecumseh engines commonly installed on Toro lawn and garden equipment. The float is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a mi...Read moressing or a faulty component that was installed on a new unit. Refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality float is made of durable plastic and is sold individually.

This item has been sourced from the original manufacturer to be used with walk-behind lawnmowers from Toro and Lawn Boy. The cable anchor attaches to the upper handle assembly. This item is used to secure the cable to keep it tied against the handle and out of the way. This item may require a screwdriver and wrench to install and is sold as an individual replacement part.

This is a genuine manufacturer-sourced component which is specially made for use with Toro lawn mowers. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. The bracket helps to secure the cover, which is sold separately. Please make sure to refer to the appropriate diagrams of your mod...Read moreel for the correct location and application of this part. Keep in mind this high-quality bracket is made of durable metal and is sold individually.

It is an authentic manufacturer-sourced component which is specially designed for use with Toro snowblowers. This replacement flat washer has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. It is a high-quality part is made of durable metal and is sold individually.