My Orders
20076 Toro Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Torsion spring broken
3 of 11 people
found this instruction helpful.
-
Henry from ORLAND PARK, IL
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked
Was this helpful?
Thank you for voting!
Lost PartSelect Number PS9053486; Tecumseh 650898A screw
3 of 12 people
found this instruction helpful.
-
Steven from FAIRVIEW, TN
- Very Easy
- Less than 15 mins
-
Socket set
I lost two of the screws that hold the plastic Lawn Boy cowling to the Tecumseh lv195ea engine. I just replaced the lost screws with the newly ordered screws.
Was this helpful?
Thank you for voting!
Wheel height adjuster lever (spring steel) cracked / split in two.
7 of 25 people
found this instruction helpful.
-
Ray from YARDLEY, PA
- Really Easy
- Less than 15 mins
-
Socket set, Wrench set
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Was this helpful?
Thank you for voting!