1802 - Parts

This white freezer door gasket measures approximately 30-3/4 inches by 19-3/4 inches. It is used on many freezer doors of top mount model refrigerators that have been manufactured since 1980.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with pressure washers from Troy-Bilt, Briggs & Stratton, and Snapper. The hardware kit includes the nuts and bolts that are used to fasten the pump body to the motor assembly. This kit is sold complete.

This is an authentic Briggs & Stratton replacement part manufactured for use with pressure washers. The seals are used with the brass head on the pump. This seal set kit is sold as an individual replacement part.

It is an authentic manufacturer-supplied check valves kit which is designed for use with Briggs and Stratton, Snapper and Troy-Bilt pressure washers. The check valves are important components that attach to the pump head to help maintain safe working water pressure in the pump. Unfortunately, over time they may wear out or get damaged eve...Read morentually requiring replacements. It is a high-quality kit which includes six check valve, the O-rings, and the hardware to secure them. Make sure to refer to the appropriate diagrams and the owner's manual for your model to ensure the correct replacement procedure. An Allen wrench set will be needed to take apart and reassemble the pump housing when replacing these components.

This is an authentic OEM part for use with Craftsman Pressure Washers. The wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reasons for replacing the spray wand are when it is worn-out or is leaking. This part is sold individually. The tool that you will need to replace the wand is a 5/8 inch wrench. Shut the pressure washer off before installing the wand.

This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.