1540 - Parts

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This item is sold individually and is made of metal. The flange bushing attaches to the flat steel washer and the wheel. A set of pliers, a socket set, and a screwdriver might be needed during the installation process. Over time this part may break and will need to be replaced. This is a genuine Ariens part sourced directly from the manufacturer for use in snowblowers and lawn tractors.

This part is sourced directly from the manufacturer, is not part of a kit or assembly, and is sold individually. The Bushing is made of durable black rubber and is usually found on the fuel tank. Through regular use, the Bushing may become worn, damaged, or dried out, at which point it will need to be replaced. Customers rate this repair as Easy.

This PTO switch assembly is designed for riding lawn mowers to control engagement and disengagement of the cutting blades. Featuring a durable yellow knob with integrated switching components, it provides clear, reliable operation for safe mower use. It’s a practical replacement for restoring consistent blade control and dependable deck operation when the original switch becomes worn or unresponsive.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the vibration of a working unit, unfortunately, over time it may begin to fail eventually requiring a replacement. Please make sure to refer to...Read more the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality vibe mount with a washer is sold individually.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This authentic item is sourced directly from the original equipment manufacturer for use with Ariens riding lawn mowers and garden tractors. It is an identical replacement for a missing or a faulty roller that was installed on a new unit. The part helps to support the deck, please make sure to refer to the appropriate diagrams of your mod...Read moreel for the correct location and application of this component. This high-quality part is made of durable rubber and is sold individually. Keep in mind the #02747651 Roller Clevis , the #02747500 Pin, Clevis and the #05503600 Flange Bushing are all sold separately.

This tension spring, also known as a coil spring or extension spring, is an authentic manufacturer replacement part used in a variety of outdoor power equipment. It is a cylindrical, steel spring with one hook/ring on each end, which is used to hook on to the equipment parts. The spring is responsible for providing tension or resistance t...Read moreo various parts for controlled movement and added stability. It is typically located in areas such as throttle controls, idler pulleys, and belts. The tension spring can rust or break over time, leading to loose components, equipment instability, and potentially causing damage. To remove and replace the tension spring, use needle nose pliers or a spring hook tool to grab the hooks and gently pry them off. Hook the new spring on the attachment points and ensure that it can maintain the required tension.

This is a genuine Ariens replacement part. The V-belt is commonly found in Ariens lawn tractors. This part is made of layered rubber and fabric, and is used to connect the clutch with one of the mower blades, which will cause the blade to spin when the clutch is engaged. Please be aware that there are different belts used in the machin...Read moree. Refer to the parts diagram to be sure of ordering the correct part. This part is sold individually.

This is a genuine manufacturer sourced replacement anti-vibration mount which is specially designed for use with Briggs and Stratton and Troy-Bilt equipment. It is one of the mounts which helps to secure the motor to the frame. The rubber material will help to reduce vibrations from a working unit. Over time the part may wear out and crac...Read morek eventually requiring a replacement. Please note, this high-quality component is sold as an individual item.