EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1469 LG Dishwasher - Instructions

All Instructions for the 1469
16 - 30 of 56

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supply line leaked afterwards. Had to replace it. Installers(Home Depot) had it rigged and now it is loose. Going to have to rig it somehow.
3 of 3 people found this instruction helpful.
  • Mark from IRWIN, PA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Loosened 3 screws and unhooked supply line and electric box and pulled it out.
Was this helpful?
Thank you for voting!
dishwasher not draining
3 of 3 people found this instruction helpful.
  • Glen from HUDSONVILLE, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
turned off circuit breaker. Removed bottom panel which allowed access to drain pump. Disconnected electrical plug. Clamped hose clips and removed hoses. Removed old drain pump assembly. Installed new assembly by reversing process. Access was a bit tight but managed to do it without pulling the whole dishwasher out of the cupboard.
Was this helpful?
Thank you for voting!
Dishwasher was making loud grinding/buzzing noise
4 of 6 people found this instruction helpful.
  • Jon from GARDNERVILLE, NV
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
Saw a YouTube video that explained the problem was the pump. Removed dishwasher from under the counter, flipped it on its side, and unplugged the unit. Removed bottom cover and the pump is right there. Used pliers to lose and move 3 hose clamps. Unplugged 3 wires and unscrewed the ground. Unhooked rubber hold downs and removed. Inst alled new pump. Parts Select pricing was best I found and shipping was fast. Nice to have a quiet house again when running the dishwasher. Cost in total was less than $100.
Was this helpful?
Thank you for voting!
There was a leak in the bottom left corner.
3 of 4 people found this instruction helpful.
  • Beverly from LOMPOC, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
I am 77 years old and got it all on but the corners did not want to go in so I had to call my grandson and he got them in. It still leaked on the bottom left side. It is getting old (11 yrs) so I decided to get a new one. It is actually pretty simple to install, but it does take a little strength.
Was this helpful?
Thank you for voting!
Two Rollers missing on lower tray.
6 of 13 people found this instruction helpful.
  • Thomas from BOYNTON BEACH, FL
  • Really Easy
  • Less than 15 mins
Snapped the rollers on.
Was this helpful?
Thank you for voting!
Roller Assembly was broken
3 of 5 people found this instruction helpful.
  • Dale from ITASCA, IL
  • Really Easy
  • Less than 15 mins
Took off the broken one and snap on the new one.
Was this helpful?
Thank you for voting!
old rack's coating had split and began to rust
2 of 2 people found this instruction helpful.
  • David from BIRMINGHAM, AL
  • Really Easy
  • 15 - 30 mins
Took a picture of original rack to make sure the new rack placed correctly. Old rack came out without need for tools and the new rack went in with ease after making sure it was facing in the right direction.
Was this helpful?
Thank you for voting!
Hinge Cables Broke (Both), AGAIN!!
2 of 2 people found this instruction helpful.
  • Blair from POTTSTOWN, PA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Cables have broken about every 3-6 months after original ones broke after 8 years. Removed front kick plate screws and remove kick plate, and remove two top screws holding Dishwasher to counter-top. Pull dishwasher out about 10 inches. Remove all broken parts and replace cables. Side dishwasher back in place and reinstall removed screws. I just hope these Cables last longer than the ones I had bought from another source. I have replaced those Cables 5 times already and hope these last MUCH longer. Delivery was very fast from PartSelect.
Was this helpful?
Thank you for voting!
Dishwasher would stop during the cycle with nE code
5 of 11 people found this instruction helpful.
  • Kenneth from BOX SPRINGS, GA
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Wrench (Adjustable)
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwash er. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.

This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Was this helpful?
Thank you for voting!
DW door would fall when not latched
2 of 2 people found this instruction helpful.
  • Robert from DALTON, OH
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
pulled dishwasher out of cabinet, removed side panel held by screws front and back, removed broken tension rope installed new rope, replaced side panel pushed dishwasher back into cabinet and fastened
to countertop, door works like new now, (the chief cook is happy as she can be)
Was this helpful?
Thank you for voting!
Front door would fall open without resistance.
2 of 2 people found this instruction helpful.
  • Ed from COHUTTA, GA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The repair took right at one hour. Repair length of time will depend on what all you have to disconnect to get your dish washer out so you can remove both side panels where you will be able to access the door springs, etc. There is a door spring on each side and I recommend replacing both connectors cords while you have the dishwasher o ut. Mine were both broken. One thing I noticed when doing my repair was that the bracket that is on the bottom of the door was not aligned properly to the small pulley that the connector cords travels under. If yours is out of alignment you will be able to tell once you get the connector cord installed. I used heavy pliers to bend the bracket slightly inward so the connector cords rides in the center of the pulley and not off to the outside as before. This may be why mine broke in the first place. After part replacement, reinstall the door panels and put the washer back in service. There are also YouTube's of this repair so you can see what you are getting into. Basic repair.
Was this helpful?
Thank you for voting!
Wrong part
2 of 2 people found this instruction helpful.
  • Penelope from LAKEVIEW, MI
  • Really Easy
  • 30 - 60 mins
The parts are wrong and am trying to return them. There was no return information included with delivery. Calling the Customer Service number for assistance did not work.

I would just like to return these rollers and would like a return address.

Thank you!
Penelope
Was this helpful?
Thank you for voting!
Two installed roller wheels came off and broke.
2 of 3 people found this instruction helpful.
  • Charles from WAUWATOSA, WI
  • Really Easy
  • Less than 15 mins
I ordered four wheels to replace the two that were broken and to have two as spares. The wheels are to be snapped onto the bottom of the lower basket. The new wheels broke upon being installed. My extra wheels came in handy. I put them in very hot water for a few minutes to soften the plastic. I put a little Vaseline on the post they were to be attached to. The wheels then slid on and snapped correctly.
Was this helpful?
Thank you for voting!
lost old wheel
2 of 4 people found this instruction helpful.
  • Timothy from SUSANVILLE, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
snapped on new axel-wheel assembly
Was this helpful?
Thank you for voting!
Dishwasher door would drop, cords were broken
1 person found this instruction helpful.
  • Vincent from FREDERICKSBRG, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Removed two screws (one each side) and the toe kick plate at the bottom. Slide the dishwasher out from the cabinets about 10", remove broken cord clip from door and spring. Install door clip and wrap cord around pulley , attach to spring then attach spring to door, lifting the door will help attach the spring. Do one side of the door at a time.
Was this helpful?
Thank you for voting!
All Instructions for the 1469
16 - 30 of 56