My Orders
- Home
- 1436606800
- Instructions
1436606800 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Froze
22 of 28 people
found this instruction helpful.
-
Matt from Oxford, GA
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
Make sure to release the springs and pulleys before you try to tackle the bolts that hold the motor base to the bottom of the washer. Mine were a bit rusty and took some force to break loose. Also it's a good idea to take pictures of how everything sits before you disassemble as the pictures in the repair kit are not very clear. Oth
... Read more
er than that it was pretty straight forward. Wiring was a breeze. . . . Good luck
Read less
Was this helpful?
Thank you for voting!
the motor burnt out
17 of 24 people
found this instruction helpful.
-
walter from watertown, WI
- Really Easy
- 1- 2 hours
-
Socket set
took washer into the garage, removed front cover & disconnected the wiring. Then i removed the motor assembly. Piece of cake to finish job.
Was this helpful?
Thank you for voting!