This two speed split phase washing machine motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the other speed. This motor runs at 1/2 horsepower and it carries 8.0 amps. It's a good idea to change your washer's belts at the same time as you replace this motor, as they may have become worn as well.
This motor performs 1725 revolutions per minute. This motor is used for some of Maytag's 06 series gas or electric drive blower model clothes dryers that use two belts.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Froze
22 of 28 peoplefound this instruction helpful.
Matt from Oxford, GA
A Bit Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers
Make sure to release the springs and pulleys before you try to tackle the bolts that hold the motor base to the bottom of the washer. Mine were a bit rusty and took some force to break loose. Also it's a good idea to take pictures of how everything sits before you disassemble as the pictures in the repair kit are not very clear. Oth
... Read moreer than that it was pretty straight forward. Wiring was a breeze. . . . Good luck
Read less
Was this helpful?
Thank you for voting!
the motor burnt out
17 of 24 peoplefound this instruction helpful.
walter from watertown, WI
Really Easy
1- 2 hours
Socket set
took washer into the garage, removed front cover & disconnected the wiring. Then i removed the motor assembly. Piece of cake to finish job.