14304 Craftsman - Parts

Start a compatible lawn and garden engine by hand with this recoil starter assembly. Pulling the rope turns the crankshaft so the engine can start. Replace the assembly if the rope is broken, the spring no longer rewinds, or the starter does not engage. Let the engine cool and disconnect the spark plug wire before repair. Check the exact engine model before ordering.

This black OEM fuel cap (1-1/2 ID) is a black plastic cap which attaches to the fuel tank to keep fuel in and keep debris out. If the cap becomes broken due to wear/damage/fatigue there may be a fuel leak, and the part should be replaced. Refer to your make, model and diagrams to ensure this cap is right for you.

This is an OEM part sourced directly from the manufacturer. The control assembly is found in Toro snow throwers and tillers and in Husqvarna engines. This part includes three metal brackets, a plastic control knob, and hardware for attachment. It is generally connected to the blower housing baffle. You may require a screwdriver and wrench when replacing these parts.

This is an authentic manufacturer soured replacement oil fill tube which is specially designed for use with Briggs and Stratton and Tecumseh engines commonly installed on lawn and garden equipment. This item helps you to check the oil level using the dipstick which is sold separately. This part is made from durable plastic and it is sold ...Read moreindividually. To replace this oil fill tube you will need a screwdriver to help with the screw that secures this part.

This plug is an OEM direct from Craftsman for lawn mowers, tillers, lawn tractors, and chippers/shredders. This plug produces the flare that starts up the fuel in the engine. You will need a deep socket and a wrench to replace this part. This plug is made of plastic and metal. This part is sold individually.

This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise ...Read morefrom the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.

Get your lawn more ready for the season by performing these key maintenance steps. By replacing these thoughtfully packaged replacement parts, you will improve your lawn mowers efficiency, emissions, and prolong its life. This lawn mower maintenance kit includes: Spark plug Air filter SAE 30 oil (20oz) Ultra Fresh Fuel Stabilizer

This is a genuine replacement part sourced directly from the manufacturer. The carburetor cover is commonly found in snowthrowers from Toro. This part is made of metal, and comes with the metal bracket and hardware for attachment. It is used as a housing for the carburetor assembly. You may require a screwdriver or wrench when replacing this item.

This piston ring set is designed to create a tight seal between the piston and cylinder wall, helping restore proper compression and reduce oil consumption in small engines. By improving sealing efficiency, it supports smoother starting, steady power, and reliable overall performance. Ideal for replacing worn or damaged rings, it helps extend engine life and maintain consistent operation.

This part is an OEM from Husqvarna. The screw (10-32x49/64 & #34) is made for use with many lawn mower engines, and is sold individually. The metal screw is often used to secure the engine air cleaner collar. A screwdriver and pliers are helpful with making the replacement.