My Orders
1424 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer quit running when lid was closed
-
Colleen from Indianapolis, IN
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Socket set
This repair took me longer because I was just giving it a try - I have no experience, although I tend to be "handy." I'm sure anyone with experience would rate this as "easy" and have taken only a short time. I had to watch the video several times to understand what to do - and the comments were helpful too. My washer is an OLD maytag,
... Read more
so I removed the front of the dash and pulled it forward to access the electronics. My switch had only 2 prongs, so I hooked up to the "lid closed" option on the new switch. It works perfectly now. Very pleased I gave it a try.
Read less
Was this helpful?
Thank you for voting!
dryer wouldn't start
-
sean from easthampton, MA
- Easy
- More than 2 hours
-
Nutdriver, Screw drivers
I found on youtube that there are directions to repair. Dryer problems are usually one of three things, the door switch being one of them. i checked this last (should have been first). ordered the part( about 65% off sear's cost) and it came in one day! It went on really easy as long as you knew from repair video how to access inside. al
... Read more
most spent $400.00 on a new one.
Read less
Was this helpful?
Thank you for voting!