1371PRO ((1696262-01-18-2851-33)(2013)) Murray Snow Blower - Parts

This metal washer is a genuine OEM part that is commonly used on various lawn equipment and is typically used to secure and seal connected components. This washer is high-quality and is sold individually, so consult with the relevant diagrams for your model to correctly determine where this washer would be for your equipment, and whether you need one, or more.

It is an identical replacement for a missing or a damaged bow tie pin that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this part. Keep in mind this high-quality hardware is made of durable metal and is sold as an individual item. Pliers may be needed to secu...Read morere or remove it. This authentic manufacturer-sourced component is specially designed for Murray, Snapper and Simplicity snowthrowers.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is an authentic item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity snowthrowers. It is an identical replacement for a missing or a faulty belt that helps to drive the augers. Please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this component. Keep in mind this high-quality auger drive belt is made of durable rubber and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers and lawnmowers. The special capscrew is used with several different models of equipment, and the application of the capscrew can vary based on the model of snowthrower or lawnmower. This capscrew is available as an individual replacement part, please see model diagram for associative parts.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

Pinion-1.417od 0.296s

This bolt is designed for use with various models of lawn and garden equipment and is a genuine OEM part. Featuring a square securing-area underneath the head for locking purposes, this bolt measures .31-inches in diameter and is 18 threads-per-inch. This bolt is made of high-quality metal and may require you to acquire multiple, depending on the use and location of installation for your equipment.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Discover the ultimate solution for your snowblower repair needs with Murray's Chute Deflector Switch. Accompanied by a wire harness adapter kit, this product exemplifies Murray's dedication to producing high-quality and reliable parts that guarantee optimal performance. The included deflector control enhances the functionality of the comp...Read moreonent, ensuring a seamless fit and operation in your snowblower. This switch, lauded for its easy installation process, has been designed to enhance and extend the lifespan of your snowblowers. With Murray, you can ensure your snowblowers keep running smoothly and efficiently. Elevate your repair experience with Murray's Chute Deflector Switch and Wire Harness Adapter today.