Models > 11041932510

11041932510 Kenmore Washer - Overview

Sections of the 11041932510

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Washer Drain Pump – Part Number: WPW10730972
Washer Drain Pump
★★★★★
★★★★★
(101)
PartSelect #: PS11757304
Manufacturer #: WPW10730972
This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair o...
$148.13
  In Stock
Order within the next 5 hrs and your part ships today!
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$7.76
  In Stock
Order within the next 5 hrs and your part ships today!
Door Strike/Hook – Part Number: WP8540221
Door Strike/Hook
★★★★★
★★★★★
(12)
PartSelect #: PS11746261
Manufacturer #: WP8540221
Used to help make the door stay closed. Sold individually.
$11.80
  In Stock
Order within the next 5 hrs and your part ships today!
Shock Absorber – Part Number: W10822553
Shock Absorber
★★★★★
★★★★★
(6)
PartSelect #: PS11723173
Manufacturer #: W10822553
Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers. Shock absorber absorbs the vibrations and movements of the oute...
$55.97
  In Stock
Order within the next 5 hrs and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.44
  In Stock
Order within the next 5 hrs and your part ships today!
HOSE – Part Number: W11366249
HOSE
★★★★★
★★★★★
(7)
PartSelect #: PS12723931
Manufacturer #: W11366249
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens ...
$31.90
  In Stock
Order within the next 5 hrs and your part ships today!
Washer Dispenser Hose – Part Number: W11366227
Washer Dispenser Hose
★★★★★
★★★★★
(6)
PartSelect #: PS12723930
Manufacturer #: W11366227
This dispenser hose is for washers and carries the contents of the dispenser drawer to the washer tub.
$21.92
  In Stock
Order within the next 5 hrs and your part ships today!
Bellow To Tub Clamp – Part Number: WP8540108
Bellow To Tub Clamp
★★★★★
★★★★★
(3)
PartSelect #: PS11746259
Manufacturer #: WP8540108
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place o...
$28.28
  In Stock
Order within the next 5 hrs and your part ships today!
Bellow To Front Panel Clamp – Part Number: W11032829
Bellow To Front Panel Clamp
★★★★★
★★★★★
(3)
PartSelect #: PS11773093
Manufacturer #: W11032829
The door boot spring clamp or outer bellow clamp on your washer is designed to keep the door boot in place. It is circular in shape, and you will find it wrapped around the bellow. To remove the old c...
$17.23
  In Stock
Order within the next 5 hrs and your part ships today!
Leveling Leg Locking Nut – Part Number: WP3359452
Leveling Leg Locking Nut
PartSelect #: PS11741219
Manufacturer #: WP3359452
This nut is sold individually. Size: 3/8-16
$7.76
  In Stock
Order within the next 5 hrs and your part ships today!
Spray Paint - 12 oz. - White – Part Number: 350930
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(2)
PartSelect #: PS347819
Manufacturer #: 350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.00
  In Stock
Order within the next 5 hrs and your part ships today!
Temperature Sensor – Part Number: WPW10467289
Temperature Sensor
★★★★★
★★★★★
(4)
PartSelect #: PS11755214
Manufacturer #: WPW10467289
This part regulates the temperature of the water in the tub. The sensor is located in the heating element.
$39.04
  In Stock
Order within the next 5 hrs and your part ships today!

Questions And Answers for 11041932510

Be the first to ask our experts a question about this model!

Common Symptoms of the 11041932510

[Viewing 15 of 15]
Will not drain
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Will not fill with water
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Will not stop filling with water
Fixed by
these parts
Show All
Burning smell
Fixed by
these parts
Show All
Lid or door will not open
Fixed by
these parts
Show All
No hot or cold water
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Engine runs but does not pump water
Fixed by
these parts
Show All
Not draining
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
F 21 error
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
Parts Used:
Washer Drain Pump
  • Andrew from St.Louis, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
362 of 401 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water pump failed
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
Parts Used:
Washer Drain Pump
  • Kurt from Caliente, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
86 of 93 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Drain Pump on Whirlpool HE Duet Sport Washer
This do it yourself repair saved me the cost of a repair man's service call plus time to put it in. 1. First of all, make sure the unit is unplugged. On this type of front loading washer you will need to remove the bottom panel, which is secured by 3 nut screws. 2. Once the panel is removed you will need to use pliers to unscrew the drain plug and allow for excess water to drain out before removing the drain pump (get a pan or something that will fit underneath the drain). This is the area in which all the loose stuff, like coins and everything else falling out of pockets, gets trapped. The trap works well and needs to be checked periodically or if left unchecked it will probably be the cause of burning up the drain pump. 3. Once the water is drained you will need to use pliers to unsecure the two hoses attached to the drain pump. The pliers will pinch the wire clamps open and you can remove the hose easily. 4. The dryer is stacked on top of my washer and in order to get to the two screws holding the drain pump I needed to put a block of wood under the washer to give myself room to get a wrench to the screws. Once the dryer and washer were unloaded and nothing on top I was able to lift the washer and slide a block of wood underneath. 5. The pump has a power supply on the right hand side (a small white box with a wire attached) Remove the wire by gently pulling on the end of it. It is a plug type end. 6. Using a wrench (or socket driver) I took out the two screws (about an 1.5"). The drain pump slides to the right and out it comes. It is also secured by two rubber seals which are easy to remove as well as to install. 7. Now all you do is work backwards, installing the new drain pump by sliding the seals in place and wrenching the screws back in to hold the drain pump, followed by putting the two hoses back on with the pliers and placing the wire back into the power supply box on the drain. I would recommend anyone being able to do this on their own or at least with another person to help with a bit of lifting. The only way I knew to replace this part was because it was making all the noise, so it doesn't take much rocket science :)
Parts Used:
Washer Drain Pump
  • Shawn from Clyde, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Wrench set
81 of 86 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!