EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1103401772 Kenmore Dryer - Parts

1 - 12 of 28

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Igniter Kit – Part Number: 279311
$32.63
On Order
Igniter Kit
★★★★★
★★★★★
(43)
Part #279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-inch flat igniter, bracket, 4-inch wire leads, and the plug. The kit can replace both round and flat igniters and is used for many gas clothes dryers. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is located within the burner assembly, so you will require tools to complete the repair. You will need a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet.
Liquid Propane Conversion Kit – Part Number: 49572A
$33.69
In Stock
Liquid Propane Conversion Kit
★★★★★
★★★★★
(12)
Part #49572A
This gas dryer conversion kit allows a dryer that is set up for natural gas to be converted for use with liquid propane (LP) gas. The kit includes the key components needed for the conversion, including burner orifices, a regulator vent cap, and a conversion decal. You may need this kit when installing a dryer in a location that uses LP gas instead of natural gas. Using the correct conversion kit helps ensure proper gas flow, reliable heating performance, and safe dryer operation after the conversion is completed.
Dryer Screw – Part Number: WP681414
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(1)
Part #WP681414
This screw is sold individually.
Natural Gas Limiter – Part Number: WP694424
$27.36
In Stock
Natural Gas Limiter
★★★★★
★★★★★
(1)
Part #WP694424
The leak limiter or natural gas limiter is used in dryers. This part acts as a cover of the adjustment screw on the pressure regulator. If you are changing from propane (LP) back to natural gas, it is best to replace this part. To convert your washer from LP to natural gas, remove the top of the dryer and screws to access the computer. When control panel is accessed, remove the wire harnesses in the front and the control panel itself. Next, remove the access panel and disconnect the wire that activates the moisture sensor. Remove the main front panel using a 1/4 inch nut driver and the belt from the pulley. Once you pull out the drummer you now have access to the gas valve. Refer to the diagram for further installation instructions. Remember to unplug your dryer from the power source for safety.
Screw – Part Number: WP693995
$7.47
In Stock
Screw
Part #WP693995
Dryer Orifice Burner (Type 4 (Propa – Part Number: WP234868
$26.82
Special Order
Dryer Orifice Burner (Type 4 (Propa
Part #WP234868
Sold individually.
Dryer Burner Tube – Part Number: WP693140
$87.39
In Stock
Regulator Adjustment Screw – Part Number: WP694423
$9.62
In Stock
Spring Regulator – Part Number: WP694422
$21.45
Special Order
Spring Regulator
Part #WP694422
Orifice Burner – Part Number: WP229742
$26.82
Special Order
Orifice Burner
Part #WP229742
Bracket, Ignitor – Part Number: WP694298
$21.45
Special Order
Bracket, Ignitor
Part #WP694298
Gas Valve – Part Number: WP8281918
$166.29
Special Order
Gas Valve
Part #WP8281918
1 - 12 of 28