My Orders
1103401772 Kenmore Dryer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$32.63
In Stock
Igniter Kit
Part #279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-inch flat igniter, bracket, 4-inch wire leads, and the plug. The kit can replace both round and flat igniters and is used for many gas clothes...Read more dryers. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is located within the burner assembly, so you will require tools to complete the repair. You will need a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet.
Read less
$33.69
In Stock
Liquid Propane Conversion Kit
Part #49572A
This genuine gas dryer conversion kit allows compatible natural gas dryers to be converted for use with liquid propane (LP) gas. Engineered to original manufacturer specifications, the kit helps ensure proper gas flow, burner performance, and drying efficiency after conversion. It includes two burner orifices, a regulator vent cap, and an...Read more LP conversion decal, providing the essential components required for the fuel conversion process.
Read less
$7.47
In Stock
$27.36
In Stock
Natural Gas Limiter
Part #WP694424
The leak limiter or natural gas limiter is used in dryers. This part acts as a cover of the adjustment screw on the pressure regulator. If you are changing from propane (LP) back to natural gas, it is best to replace this part. To convert your washer from LP to natural gas, remove the top of the dryer and screws to access the computer. Wh...Read moreen control panel is accessed, remove the wire harnesses in the front and the control panel itself. Next, remove the access panel and disconnect the wire that activates the moisture sensor. Remove the main front panel using a 1/4 inch nut driver and the belt from the pulley. Once you pull out the drummer you now have access to the gas valve. Refer to the diagram for further installation instructions. Remember to unplug your dryer from the power source for safety.
Read less
$7.47
In Stock
Screw
Part #WP693995
$26.82
Special Order
$87.39
In Stock
$9.62
In Stock
Regulator Adjustment Screw
Part #WP694423
$21.45
Special Order
Spring Regulator
Part #WP694422
$26.82
Special Order
Orifice Burner
Part #WP229742
$21.45
Special Order
Bracket, Ignitor
Part #WP694298
$166.29
Special Order
Gas Valve
Part #WP8281918
Common Symptoms of the 1103401772
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More