11028133410 Kenmore Washer - Parts

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

This clutch slider kit is genuine OEM replacement kit that fits in various models of washing machine. It is a part of the transmission system in your washer which is responsible for controlling the movement of the agitator during the wash and spin cycles. The assembly includes the clutch band, slider, and lock ring. The kit helps to regul...Read moreate the speed and direction of the agitator or drum. It allows the machine to start and stop spinning smoothly, as well as change speeds as needed during the wash and spin cycles. If the clutch slider kit has worn or damaged components, it can lead to problems like difficulty starting or stopping the machine, excessive noise during operation, or failure to spin properly.

11-16 x 3/4 Sold individually.

This is a clutch designed for use within top-load washers. The clutch is used to engage the transmission of your washer during the agitation and spinning cycles, to ensure it runs properly. If your washing machine is not agitating or spinning properly, the clutch could be the problem, and it will need to be tested and then potentially rep...Read morelaced. To replace the clutch in your washing machine, you will need to disassemble your washer from underneath, and will need a socket wrench and screwdriver as a result. This clutch is an OEM part and is only sold with a single securing screw.

Genuine OEM WPW10581874 Washer Drain Pump. The drain pump removes water from the washer during the drain portion of the cycle.

This washer gearcase is a genuine replacement component engineered to restore the core mechanical functions of your washing machine. Also known as a transmission assembly, it drives both the agitator and the spin basket, ensuring effective washing and water extraction during the spin cycle. Compatible with select models from Whirlpool, Ma...Read moreytag, KitchenAid, and other affiliated brands, this OEM part is essential for resolving issues such as failure to agitate or spin, poor washing performance, unusual noises, or internal leaks. Replacing a faulty gearcase can significantly improve your washer’s efficiency and extend its service life. Installation should be performed with the appliance unplugged and may require moderate technical skill.

This is the hose that tells your appliance if your tub is at the desired water level.

This washplate is for washers and turns back and forth at the bottom of the spin basket to circulate the wash load through the water.

Presenting the genuine NUT-SPANER Spanner Nut from the renowned brand, Whirlpool. This authentic Spanner Nut is specifically designed to work with several models of washing machines by Whirlpool. It boasts of a superior OEM design, providing undeniable effectiveness and reliability. Attentively confirm that this part fits your machine bef...Read moreore ordering, as there can be minor variations in size and shape. Rest assured, installing nut W10909670 guarantees exclusive safety and efficacy. Opt for this Whirlpool Spanner Nut for the consistent maintenance of your household appliance.